Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
ATS 3882 9/16 Cylinder Base Wrench
MFR Model# 3882-9/16
FREE Shipping
Overview
| The ATS 3882-series Cylinder Base Nut Wrenches are made from forged alloy steel, tempered, and hardened for maximum strength. They also have an industrial chrome plating to improve surface wear, and protect against rust and corrosion. Their thin-wall construction guarantees they will fit nuts close to the cylinder casing without grinding down the wrench’s outer diameter. And with a 15” span, they clear even the tallest cylinders. In fact, the 3882 Cylinder Base Wrenches address just about every concern of the previous 2882 series, while including several enhancements to make your work easier. They also carry the ATS Pro lifetime warranty, so they may very well be the last cylinder wrenches you’ll ever have to purchase. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Features
- 1/2” Hex Size.
- Fits all Continental, most Lycoming, and many other types of aircraft engines.
- 15” (381mm) span fits around almost all aircraft cylinders.
- 0.14”(3.5mm ) thin wall fits into tight areas.
- 12-point end fits both hex 12-point nuts.
- 1/2” square drive.
- Forged from 4130 steel and tempered for maximum strength.
- Industrial chrome plating improves surface hardness and resists corrosion.
- Quality tested to meet or exceed engine manufacturers torque specs.
- Replaces our 2882 series wrenches.
- ATS Pro Lifetime warranty.
Application Eligibility
- 9/16" - Continental A50, A65, A75, A80, C75, C85, C90, C125, C145, 0-200, 0-300, G0-300, E-165, E-185, E-225, and IO-360 series engines.
- 1/2" - Continental A50, A65, A75, A80, C75, C85, C90, C125, C145, 0-200, 0-300, G0-300, E-165, E-185, E-225, and IO-360 series engines.
- 5/8" - Continental A-65, 0-470, and IO-520 engines.
- 3/4" - Lycoming Wide Deck engines, as well a the Lycoming models IO-390D & D2 engines. It is also used for some of the older Continental engines such as the original A-series.
Reviews
Does not work on a Franklin engine.
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
Worked great. Fit without grinding.
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
Great tool and inexpensive
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
Nice tool and affordable
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
This one was so much better than the $18.95 one.
Worked great. No modifications needed. Use on Lycoming O-290.
Just as described.
Quality is okay for occasional use but not for a daily mechanic. The 9/16 fit but the 1/2 inch wrench I purchased would not fit onto the nut because it was too thick and did not have enough clearance to the cylinder wall.
Verified Purchase
ATS 3882 9/16 Cylinder Base Wrench
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
