IC-Loc™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-Loc Blue™ is cured, the fasteners can be disassembled with standard hand tools if required. BSI’s IC-Loc™ threadlockers are anaerobic adhesives that cure in the absence of air, which occurs as a threaded fastener is tightened. They prevent the loosening of fasteners due to shock or vibration. Full strength is reached in 1-3 hours. IC-Loc™ is not compatible with most plastics. For best results, all surfaces should be cleaned before the application of IC-Loc™. IC-Loc™ should be store at temperatures above 45ºF and less than 80ºF. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.