Airspeed switch kit for Trig TT31 and King KT74 transponders. Includes: Airspeed differential pressure switch, qty 1 (PA-111114-821) Clear Poly-Flo tubing, qty 48 inches (PA-111114-825) Nylon union tee, qty 2 (PA-111114-831) Nylon insertion stabilizer, qty 6 (PA-111114-833) |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Bought for my Rans s9. Not installed as yet.
If there are issues with any switches, Peregrine would like to know so that they can get a no cost replacement out ASAP and also obtain the suspect switch for further fault analysis. Thank you,
Received my switch kit. Installed as the STC states but it failed the pitot static test. The switch leaked which made it U/S. I suspect there are quality control issues with this switch. Mine is going in the trash.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The switch closes at 38 kts.
The STC is not included with this part, but as a component of the unit for which this is used. E.g., the KT74 transponder STC covers this switch.
We have added the install instructions to the web page in the 'Documents' tab. Please download and review it there.
This runs on airflow not voltage, the switch closes at 38 knots.
This will work for both 12 and 24 volt system.
0.200" they can be used with 1/8-3/16 tubing.