For #10 Screws. You know how frustrating it can be to remove a painted over screw only to wind up chipping up the paint job. But you wouldn’t have that problem if you had a set of these innovative paint cutters. They work by slicing through the paint around the head of the screw so you can remove it without chipping the paint. They have a 1/4x28 thread to fit into any angle drill or you can get the optional arbor (p/n 12-02460) for use in a drill chuck. Does not work on dome head rivets. 1 lbs (0.5Kg) shipping weight. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Works great. Requires experience though
Screw Paint Cutter #10
This worked really great to cut the paint around the screws holding the fuel tank in my Piper Arrow. NOTE: You need this #10 to cut the paint around 8-32 screws!!!!! Do NOT buy a #8 for this! (Yeah I know that does not make any sense! I ordered the #8 and had to send it back and get the #10) Carl
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These paint cutters are designed for counter sunk screws. They are not to be used with protruding head screws like the an525.