This 12 point, full ratchet crimping tool terminates precision BNC connectors in size RG 55,58,59,62,141,142,223,303 and 400. This crimper is built to MS22520 specifications and die set is included with the crimper. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Strong tool that will last for a long time.
Amphenol Rf Coax Crimp Tool 47-10070
Excellent tool, arrived in perfect condition. highly recommended
Professional grade tool, low price. What else can you say. Very Happy.
Amphenol Rf Coax Crimp Tool 47-10070
Nice crimpers. Used on rg58 and rg400. No problems.
Amphenol Rf Coax Crimp Tool 47-10070
Tool worked well reasonably priced, no instructions came with the tool, study how to use it prior to wasting a coax pin.. coax pins are not sold separately. If you ruin the pin you will have to buy a new connector assembly.
Good, solid tool but no instructions included, made in Taiwan.
First crimp with a new out of the box crimper. Installing the center pin the crimp failed, center pin pulled off. This not where I wanted to be with a new tool. Frustrating.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The crimper comes with 1 die that works with the listed cables and connectors. The dies are screwed in.
Both the pin and barrel can be crimped using this tool.
The same die is used for all of the RG cables listed. The die consists of a .213, .255, and .068 inch cavities. This will crimps pins and coax for RG 58, 142 and 400.
No, this ships as the tool only with no manual.
This will work for those connectors. This is the crimper our harness shop uses for our coax assemblies.
Yes this crimper is calibrated at the factory and can be set in to be calibrated.