RF Connectors / Coaxial Connectors TNC STRAIGHT PLUG STANDARD CABLE. Amphenol RF TNC Threaded Connector Series are miniature, threaded weatherproof units with a constant 50Ω impedance that operate from 0-11GHz. There are two types of TNC connectors: Standard and Reverse Polarity. Reverse polarity is a keying system accomplished with a reverse interface, and ensures that reverse polarity interface connectors do not mate with standard interface connectors.Many TNC connectors are recognized under the component program of Underwriter's Laboratories and have undergone stringent testing from an independent laboratory. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
They fit the cable
Amphenol 122372 TNC Male Rg 400
Looks fine.
Amphenol 122372 TNC Male Rg 400
Quality product.
Amphenol 122372 TNC Male Rg 400
Amphenol 122372 TNC Male Rg 400
Amphenol 122372 TNC Male Rg 400
Quality product.
Amphenol 122372 TNC Male Rg 400
Highly recommended! Best for RG400!
Amphenol 122372 TNC Male Rg 400
Amphenol 122372 TNC Male Rg 400
Good
Amphenol 122372 TNC Male Rg 400
It is what it is: good quality TNC from Amp. The price from Spruce is as good or better than from any other supplier Ive found. Ships quick. Works as intended.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the GA35 uses a TNC style connector. An alternative would be part number 11-04447.
Yes. The TA70 GPS antenna will require a TNC male connection.
Yes, a standard TNC male is required for interconnecting the WAAS GPS antenna to the Garmin GTN 650.
Take a look at Part# 11-17224. It is a female TNC straight crimp jack. If you need to splice some wires together consider looking at our Butt splices.
This is a dual crimp connector.
No, this works with RG-55, RG-142, RG-223, RG-400.
Yes, this connector is made for RG-400 coax cable and TNC.