Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Hybrid Sr-Q Spot Landing Light White
MFR Model# 944213
FREE Shipping
Overview
| With the successful release of the SRM(Single Row Mini) line of LED products, Rigid Industries has taken this slimline product concept to the next level with the new SRQ (Single Row Quad). Utilizing the same compact aluminum design as the SRM, but with lumen output equivalent to the Dually/D2 Series, the SRQ o ers yet another option for your lighting needs. Available in standard black or marine white coatings, with Specter or Hybrid optical systems. Limited lifetime warranty |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Specifications
- Landing
- 1LB
- 20 Watts 1.45 AMP Draw
- 4 LEDs
- 1360 Raw Lumens
- 151.1 Lux at 10m
- 246 Beam Distance
- 15111 Peak Beam Intensity
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer, this lamp is 4.96 inches wide and 1.84 inches tall.
Per the supplier: yes, the lights will ship with the mounting bracket.
This is attached with the included mounting bracket.
The specifications tab shows the details for each on their respective pages, but in short, the Spector, 11-11220, is a brighter unit with 6 LED's, and the Hybrid is not as bright with 4 LED's. They are manufactured in the same case.
This is integrated with RFI/EMI protection. However, depending on wire placement and the device itself, the possibility of RFI/EMI is still possible in rare instances. Normally if it still persists after installation, a Ferrite Clamp can be used to dampen the interference.
