Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
J.P. Instruments 3.25 EDM 350 4 Cylinder Full Package Non-TSO
FREE Shipping
Overview
Intended for installation in experimental aircraft only
Optional fuel pressure functionality available. If selected, order form must be completed that is available under "Documents". Difference between the Basic/ Full Package:
|
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Features
- Improved engine efficiency
- Reduced maintenance costs
- Greater fuel economy
- Reduced operating costs
- Smoother engine operation
- Proper engine temperatures
- Longer spark plug life
- Reduced engine vibration
- 3 year Warranty
- Selectable Positions for Linear gauges
Optional Functions
- RPM - Engine
- MAP - Manifold Pressure
- O-T - Oil Temperature
- O-P - Oil Pressure
- F-P - Fuel Pressure
- OAT - Outside Air Temp
- TIT - Turbine Inlet Temp
- CRB - Carburertor Temp
- CDT - Compressor Discharge Temp
- AMP - Current Amps or Load
Specifications
- EGT 4 or 6 probes
- CHT 4 or 6 probes
- Volts
- Shock cooling
- LOP/ROP JPI Exclusive Leaning Mode
- Fuel Flow (USED, Remaining, GPH
- Endurance, GPS destination)
- MAP
- Oil Temperature
- Oil Pressure
- OAT
- %HP (Requires: OAT, RPM, MAP, & FF )
- Power connector
- All required Harness
- EZTrends
- Data recording-100 hrs. Download USB
- 1 GB memory stick
- Selectable Positions for Linear gauges
- 3 year Warranty
- Optional functions
- CDT
- IAT
- CARB Temperature
- TIT
- L-R Main - Fuel Quantity, L/R Main
- V-2 - Second Volts
- Amp-2 - Second Amps
- % HP - Requires FF, OAT, and RPM
- Fuel Flow - Fuel Flow includes:
- GPH - Gallons per hour
- REQ - Fuel Required
- USD - Fuel Used
- H:M - Endurance Hours and Minutes
- MPG - Miles per gallons
Documents
- Installation Manual (PDF)
- Required Order Form (PDF)
Reviews
expensive for what it is, and the extra sensor for oil and oil pressure are very expensive.
Verified Purchase
J.P. Instruments 3.25 EDM 350 4 Cylinder Full Package Non-TSO
Verified Purchase
J.P. Instruments 3.25 EDM 350 4 Cylinder Full Package Non-TSO
Very easy to install and use. Great product and the price is right. Always been happy with purchases from Aircraft Spruce.
Great unit. I installed it in my Christen Eagle. Kit is complete with everything you need and other than being time consuming, was a very straight forward install. I just went with the basic CHT/EGT kit, but will add other options later which is simple once the gauge is installed. The display is very nice and bright, and scans automatically through all cylinders. Very easy to understand and use. Finally found a unit that has EGT and CHT in one, color display. Also show system volts.
Only negative comment is the unit didn’t come with all of the connectors or pins . Nice unit
The instrument seems OK. But forget it if you need technical support. Its horrible. Front line person doesnt know anything and back line never return your calls. I should have gone with EI.
Does not properly support ROTAX installation.
I bought a 350 recently. The unit is good. Unfortunately, JPI customer service is a mess. They forgot to include the panel mounting bracket. Then the mailed it to the wrong address. Holding up the whole project.....Oh JPI....work it out already.
The “Full package” doesn’t come with all the sensors needed to run the motor, by the time you add everything it’s cheaper and better to upgrade to the 740. The rep I spoke with told me it came with everything, so I had trouble returning it because these are special order. JPI was shut down and had no one to help so my plane is grounded till they come back to work.
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the following probes and functions are included:
- EGT - Exhaust Gas Temperature
- CHT - Cylinder Head Temperature
- Included - Probes and Harness
- VDC - Voltage
- CLD - Shock Cooling on "All" Cylinders
- ROP/LOP - Lean Find
- DIFF - Engine Health
- USB - Data Port built in
- Data Record - 600 Hrs. at every 6 sec
- EZTrends - Graphing software, including Google Earth Location
CHT and EGT probes are included. Fuel Flow must be ordered separately.
Different probes may work for this system but cannot be guaranteed. All testing was done with JPI probes and harnesses. Please see website for included functions as well as available optional functions.
Different probes may work for this system but cannot be guaranteed. All testing was done with JPI probes and harnesses. We recommend using only JPI probes with the EDM 350. Please see website for included functions as well as available optional functions.
No, these are available as additional options. EGT and CHT are the only probes that come standard.
If this is a new install then yes you, will need to order the transducer. If you had a FS 450 and wanted to replace the unit with a EDM 350 you could use the older JPI transducer.
You will need to specify this in the special instructions box when you add this to your cart. You can also specify this in the necessary order form that you send in at time of order.
No, you can only use JPI probes with the EDM 350.
Yes, that is correct.
The difference between the basic and the full packages are the functions that are included.
Basic includes: RPM+EGT/CHT Bar Graph, Fuel Flow, Volts, OAT, Flight & Tach timer and Local & Zulu time.
Premium includes: RPM + 5 add'l Primary Functions, AND up to 5 non-primary functions, that can be displayed on a secondary page.
