Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
Dynon Skyview HDX 7 Display With Harness
MFR Model# 101318-004
FREE Shipping
Overview
|
SkyView HDX features improved displays, beautiful design, unrivaled control ergonomics, and an upgraded touch interface. SkyView HDX displays are compatible with all existing SkyView components and feature identical mounting profiles and electrical connections. Clear, Vibrant Displays:
|
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Specifications
SV-HDX1100 10" Skyview- Dimensions:
- 10.31" Wide
- 7.1" High
- 3.1" Deep
- Resolution:
- High Definition Touch Screen
- 800 Pixels High
- 1280 Pixels Wide
SV-HDX800 7" Skyview
- Dimensions:
- 7.64" Wide
- 5.59" High
- 3.13" Deep
- Resolution:
- High Definition Touch Screen
- 800 Pixels High
- 1280 Pixels Wide
Features
- 12", 10" OR 7" Displays
- PFD
- Synthetic Vision
- Moving Map
- Terrain
- Engine Monitor
- Autopilot
- Radio / Transponder Interface
- LRU (Line Replaceable Unit)
- Architecture
- Redundant, Simplified Wiring
- Very Bright High-Resolution
- Screens, 1350 and 1200 Nits
- Dual Joystick Knobs
Harness
SkyView HDX Display with Harness Bundle- SV-HDX800/A 7", SV-HDX1100/A 10", or SV-HDX1200 12" SkyView HDX Display
- SV-HARNESS-D37
- SV-SYNVIS-280 Synthetic Vision
- SV-MAP-270 Navigation Mapping
- SV-HDX800/A 7", SV-HDX1100/A 10", or SV-HDX1200 12" SkyView HDX Display
- SV-SYNVIS-280 Synthetic Vision
- SV-MAP-270 Navigation Mapping
Videos
Reviews
Functioned well.
A neat setup to make you ADSB work on your Dynon
These are made (I guess) by Dynon. I wish the wires ends were marked as to where they go. Ito me the average builder it’s hard to figure out where they hook up to. I’m sure others can figure it out but would be so simple if Dynon would just use wires that had where they go, like spruce does.
Works as stated. Necessary if you fly experimental within B class airports with 30 mile Mode C radius veil.
New EMS module corrected RF EMI issue on Skyview Classic display.
Needed a backup battery for a Skyview display and very few companies stock them. You do, which saved a lot of shipping time coast to coast. Thanks again for the great service.
dynon skyview knob and pa panel
In addition to being ridiculously priced, this back up battery has very short connection wires. On my 2012 CTLSi the connectors had to be changed Very little wire to work with
Verified Purchase
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
You have the option of RG 400 or RG 58 coax cable. RG 400 is a higher quality cable but either will work.
No, the Skyview system is not TSO'd and is intended for experimental aircraft.
They are standard density pins.
This would be part number 10-01196. The diagram is under the documents tab.
No, this system is not FAA Approved and is intended for use in experimental aircraft only.
Unfortunately, this unit cannot be installed in a certificated aircraft even as a back up. Please see the certified G5 for a qualifying unit.
Yes, you can find it on our website by keyword searching "Skyview HDX" or part # 10-06254.
Yes, these will include the connector kits.
The servo provided is the SV42EL.
No, if you purchase the SkyView Touch System now, you will not not need to purchase the SV-MAP-270 unlock key.All functionality of that software will be included with your purchase.
