SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM | 877-4-SPRUCE

Westach Bayonet EGT Probe (Rotax)

$85.75/Each
Part# 10-01240
MFR Model# 712-4D6K

Overview

Senders, clamp type senders with 3/16" diameter probe. Bayonet EGT probe (Rotax).

Note: Westberg 712 Series Thermocouples are for Non-TSO’d CHT & EGT Gauges only. They have two small pins which are the same size.

Made in USA
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Specifications

  • K - wire EGT probe
  • 8x1. Ommthd
  • 3/16" OD
  • 2-1/2" Tip
  • 4' lcad

Reviews

Just my particular experience, but if you need to replace one EGT sensor in a two sensor application, get reo Was exactly what I needed. No fuss- no muss. Came to me quickly and is now doing the job!

Bill N Verified Purchase

Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO

October 19, 2024

very well built, easy to install

John H Verified Purchase

Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO

September 3, 2022

Fit perfectly.

Dennis R Verified Purchase

Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO

November 16, 2021

I had these on my Rotax 503 engine and I recently did a rebuild on it. I broke one trying to get it out of the exhaust manifold. I really liked these as they go under the head bolts and eliminated the problem with compromising the end that goes against the head every time I changed my spark plugs. I had two sets that went under the plugs before I got ones like these that went under a head bolt. They lasted a long time. I definitely recommend these. Purchase and shipment from Aircraft Spruce was prompt and problem free.

Dave
June 22, 2018

Was carefully tightening the probe nut into the pipe and with hardly any pressure whatsoever it snapped right off. I have done bodywork for 40 years so I know what it takes to overtorque a nut

Terry M Verified Purchase

Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO

July 8, 2021

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is this probe compatible with the AVMAP ENGIBOX?

Neither manufacturer was able to confirm compatibility. We were offered these specs for the probe: This probe is a type k probe that is 48in long and rounded.

Q: Will this probe work for rotax 447 and the falcon EGT Gage

Yes, this is compatible with those two units.

Q: Will this work with Rotax 912 and Garmin G3X?

Garmin recommends Garmin probes with the G3X.

Q: What size and type of thread is the probe?

8 x 1.0 mm

Q: 10-01240: Does the coupler split so I can fit into the threaded mount of the exhaust?

This will thread into an 8x1.00mm threaded exhaust port.

View in Catalog

View Image View in Catalog