Sender Type | Description | Part No. | Price | Buy |
---|---|---|---|---|
Temperature | 1/4x28 THD, 1/4" tip with nut, 4' lead, 1,750 ohms @ 100°F | 10-06274 | $62.95 | |
Oil Temp | Oil Temp 1/8" NPT | 10-01249 | $47.95 | |
Oil Temp | Oil Temp (Cont, Lyc) | 10-01236 | $76.75 | |
EGT | (Long Life) 1" Tip | 10-01225 | $66.75 | |
EGT | 1/2" Tip | 10-01233 | $64.80 | |
EGT | 1/4" Pipe Bayonet | 10-01282 | $73.75 | |
EGT | 3/8"-24 for Lycomings | 10-01253 | $77.95 | |
EGT | 0.8-1MM Bayonet for Rotax | 10-01240 | $85.75 | |
EGT | 1/8" NPT | 10-01263 | $73.75 | |
CHT | 18 MM Thermocouple | 10-01226 | $45.50 | |
CHT | 14 MM Thermocouple | 10-01227 | $45.50 | |
CHT | 3/8-24 Bayonet | 10-01230 | $82.75 | |
CHT | 1/8 NPT Probe | 10-01285 | $78.95 | |
CHT | 712-912K CHT (RTX 912) | 10-01304 | $89.75 |
Non-TSO’d fuel quantity indicators available for single or dual tanks. Requires 0-5V capacitance senders (not incl.) Note: Westberg 712 Series Thermocouples are for Non-TSO’d CHT & EGT Gauges only. They have two small pins which are the same size. Made in USA |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Westach CHT Probe J Wire 3/8X24 Thd 4 Lead 712-7Dk Non-TSO
Worked great
Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO
Easy to install, plugs right in to the existing leads, and worked great today
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Just my particular experience, but if you need to replace one EGT sensor in a two sensor application, get reo Was exactly what I needed. No fuss- no muss. Came to me quickly and is now doing the job!
Westach EGT Probe K Wire 8X1.0MM Thd 712-4D6K Non-TSO
connections plug right into the Westach 4 position switch with no modifications needed.
EGT Probe 712-20Dwk Long Life
EGT Probe 712-20Dwk Long Life
Westach CHT Probe J Wire 18MM Ring 4 Lead 712-5Wk Non-TSO
My existing probes were 40 years old and failing! These new probes have me up and running again.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Good like expected
EGT Probe 712-20Dwk Long Life
The probe was easily installed and worked properly. The only issue is that it historically does not last but a couple of years and has to be replaced.
Westach EGT Probe K Wire 1-5/8 Clamp Type 712-2Dwk Non-TSO
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
They are both are EGT probes, but p/n 10-01225 is non-tso approved while p/n 10-01228 is FAA TSO approved.
Yes. Our part # 10-01226 is ordered directly from Westach under 712-5WK. They are the same product.
Part # 10-01230 is priced and sold individually, one probe.
No, part # 10-01226 is non FAA TSO approved.
Part# 10-01240 is 712-4D6K