Challenger CP102 Oil Filter Wrench Torque Wrench Adapter 1" L |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
as advertises
Challenger Torque Wrench Adp 1 L
Im giving it 5 stars due to the price (compared to the others). That said, I did have to do a little modifying to make it work. The wrench end would not fit entirely over the 1 nut on the Tempest Filter. Due to such, it would slip right back off and was not useable. I took a Dremel with a small cutting wheel and took off just a little material on each of the inside faces of the wrench end of the tool to widen it up a little. Then I repainted and it works perfect. The mod didnt take me but 5 minutes. Im not sure if the paint coating they put on was too thick or the dimensions were just off ever so slightly. It didnt take much machining to get it to work perfect.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This wrench does include paperwork to determine the torque value. We have added it to the web page in the "Documents" tab for customer review.
This is made to fit the Champion and Tempest oil filters. The drive size is 3/8".