W323A MATCO mfg produces a superior 6 inch wheel and brake assembly for use with aircraft requiring less than 1860 lbs per wheel. This model uses 1.5 inch TAPER/ROLL bearings. (Check the product comparison table for other bearing and caliper configurations). Dimensions The W323A 2-STAGE is a 6 inch wheel with 6.15 inch width with an additional 1.35 inch caliper spacing. Bearing spacing is 3.32 inches and axle spacing is 2.6 inches. The total weight of this wheel and brake assembly is 13.75 pounds. The bearing axle diameter is 1.5 inches. Performance The W323A is designed for the following standards: Static Capacity: 1860 LBS Load Limit: 5580 LBS Maximum Accelerate/Stop Kinetic Energy: 410000 ft-lb Torque Rating (@450 PSI): 8906 in-lb Product Comparison Table |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.