Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Aluminum Rivet AN426Ad-3-3.5
MFR Model# AN426AD-3-3.5
FREE Shipping
| Part No. | Type | Dia. x Length | Qty./Lb. |
|---|---|---|---|
| AN426AD-3-3.5 | 2117 Hard | 3/32 x 7/32 | 5618 |
Overview
|
Note: quantities must be entered in decimal format. (i.e. 0.25 for 1/4, 0.50 for 1/2, etc). Minimum Purchase 1/8 lb. (qty .13). "A" rivets are "soft". They are fabricated from 1100-grade aluminum and have a tensile strength of 16,000 PSI. "AD" rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. Prices below are for 1lb. quantities. All rivets can be purchased in 1/4 lb. (use qty .25) and 1/8 lb. (use qty .13) packages. AN470 (MS20470) AN426 (MS20426). AN426 are 100° rivets. 10% Discount for 5 lbs of rivets or more (per PN). |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
In The Box
- Price per Lb.
Reviews
Glad to be able to buy 1/8 pound qty of several sizes, just to make sure I end up with the size I actually need. It would be great if you offered an assortment pack in a parts organizer. That would be a big seller, for sure. Oh, of the 6 or 7 bags I bought, one of them (the smallest 3-3 rivets!) was not stapled or taped. Guess which bag I picked up from the bottom. Please be careful closing these bags up...Im still finding them on the kitchen floor.
Great to have these half sizes.
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
They provided a riveting performance.
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Shipped fast! These are great and definitely give me more confidence with the ladies.
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Perfect for nutplates
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
as advertised
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Verified Purchase
Aluminum Rivet AN426Ad-3-3.5
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the tech data sheet, the rivets have 100* countersink, and the hard "AD" rivets are made from 2117-T4 aluminum.
Yes, they are priced and sold by the lb. We can sell them in as little as .13 lbs. Enter the quantity with a decimal, so if you want a 1/2 lb, enter the quantity as 0.5.
Approx 1200.
Several tools would be needed. A rivet gun with a flush rivet set, an air compressor, and a bucking bar to start. There are also rivet squeezers, and benchtop rivet fixtures. There are several tools and accessories to choose from.
AD rivets are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI.
This is +/- .010.
|The diameter is .275" and there are no markings on the head.
Approx 306 rivets per 1/4 lb of AN426AD-5-5.
0.13 LBS.
These have a 100 degree countersink.
