Aircraft Anti-Collision Strobe Light, 45w, 1350 LM CREE LEDs
Weight: 0.28 oz (8 g) Installation: 1- Clean surfaces with alcohol. 2- Apply adhesive tape 3- Let stand for 24 hours. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Brilliant attention-getting strobes at home builders prices at a fraction of the current draw call that a win-win!
NavStrobe Anti-Collision Strobe Light 45W,1350 Lm Cree Leds
Very bright, and super easy to install. I did follow other’s reviews and was very gentle with wires, and then added more silicone around wires once installed. Time will tell for durability, but for now I would highly recommend these strobes.
NavStrobe Anti-Collision Strobe Light 45W,1350 Lm Cree Leds
Love this lights very visible
NavStrobe Anti-Collision Strobe Light 45W,1350 Lm Cree Leds
Very bright, yet low power draw...Flashes three times then pauses, three times then a pause...Quality looks good...The two wires sticking out the back are not anchored well where they enter the case...Should be reinforced with sealant right away before they break off.
NavStrobe Anti-Collision Strobe Light 45W,1350 Lm Cree Leds
I have spots in my eyes from testing! These are WAY brighter than expected! They flash 3 times per second, with about a 1/2 second pause. No, they can not be synchronized, but that will not be a problem. They are also smaller in thickness than I expected, and this is a good thing. I purchased the Red, Green and one White. Measured the current draw at about 670 milliamps each, which is right about where they should be. Perfect for experimental and ultralight aircraft!
Speed of shipment was outstanding Website was easy to navigate Quality product
Excellent product.
Had some wiring issues (red power wire breakage), but prompt warranty replacement and excellent after sales help from Chris Winter (builder). Light is very bright, aerodynamic. Velcro works well but also recommend silicon sealer around unit after installation.
These are great little anti-collision lights. I bought two of them for my Kolb Firestar ultralight. Very bright, light weight, easy to install, very low power usage. I would highly recommend this unit.
These position lights work great,easy to install,plug and play.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It does not, It will work with any DC source that is 10-15VDC.
This is not an FAA/PMA approved unit and should be installed where the builder feels would work best as an anti-collision strobe.
The transparent cover is included.
This is not an FAA/PMA approved unit and is designed for experimental aircraft.
These anti-collision lights are timed independently. Sometimes they will synchronize, but only by chance. They are one color per light, that flash together.
The effective viewing angle on the horizontal plane is 120 degrees off vertical with reference to the PCB. The flash rate is 25ms (40/s).
Per the supplier: We have not done any engineering measurements of that nature, since the FAA only wants to know the light output in candlepower or lumens (1350 lumens). Only the coast guard does those type of measurements.
The red LEDs have 1300 lumens. Brightness is slightly less than the white.
Each assembly is one color, red, green, or white, and flash only.
The unit is 2.37" long, 1.20" wide, and .39" tall.