Handi-Spray™ Belt Pak system
Required Air Pressure: 80 PSI @ 5 - 6 CFM Capacity: 1 quart Weight: 7 lbs Hose: 3'
5" x 1/8" Hook Wand 36" Superflex
5" x 1/8" Hook Wand 36" Superflex 36" x 1/4" 3 Foot Wand 72" x 3/16" 6 Foot Wand 96" x 1/4" 8 Foot Wand |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Cricket Wand | |
Hook Wand | |
Superflex Wand | |
| |
3 Foot Wand | |
6 Foot Wand | |
8 Foot Wand |
Worked as advertised, tech support was friendly and knowledgeable when I called before making the purchase. Amy at Aircraft Spruce was very helpful. got the product to me right away and I was able to complete my clients project on time.
Purchased the unit. It was hard to control the output. After going outside and spraying and adjusting the spray output and wasting about 1/4 of a gallon of corrosion X. I achieved a close enough spray pattern/output. I used on two of our aircraft. But after letting the unit sit for two weeks, it was impossible to get the aluminum container to unscrew. Aluminum on aluminum and the threads stripped out. A total waste of $1000.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This has never been tested before, although this has been tested with a heavy duty anti-corrosion compound and it worked perfectly fine. Keep in mind that the ACF-50 5000 spray system (09-04053) has been tested and is made to work with the ACF-50 anti-corrosion compound.
Yes it is.