Description | Part No. |
---|---|
EIS-41000IC Impulse Coupled | 08-07505 |
EIS-41000 / EIS-41000IC The EIS-41000 Electronic Ignition Kit is a fully STC'd kit for most Lycoming 4cyl engines. Replacing one magneto with the EIS-41000 will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. EIS-41000 adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000 are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Kit includes: all the required parts to replace the direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming engines. (Please refer to the eligibility schedule to verify the system can be installed on your engine). Note: engines are being added regularly EIS-41000T Twin Engine Aircraft; Lycoming 4cyl Engines, Standard Rotation Direct Drive (non-impulse coupled) Magneto Replacement The EIS-41000T Electronic Ignition Kit is a fully STC'd kit for most Lycoming Standard Rotation 4cyl engines installed on twin engine aircraft. Replacing one magneto with the EIS-41000T will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000T adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000T are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Kit includes: all the required parts to replace one direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming, standard rotation engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. EIS-41000TIC Twin Engine Aircraft; Lycoming 4cyl Engines, Standard Rotation Impulse Coupled Magneto Replacement The EIS-41000TIC Electronic Ignition Kit is a fully STC'd kit for most Lycoming Standard Rotation 4cyl engines. Replacing one impulse coupled magneto with the EIS-41000TIC will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, improved high altitude performance and better starting performance. The EIS-41000TIC adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TIC are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Note: hand propping with an electronic ignition system is not recommended. Hand propping aircraft is a very dangerous activity and is never recommended or advisable. Kit includes: all the required parts to replace one impulse coupled magneto in most 4cyl Lycoming, standard rotation engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. EIS-41000TLH Twin Engine Aircraft; Lycoming 4cyl Engines, Counter-Rotating Direct Drive (non-impulse coupled) Magneto Replacement The EIS-41000TLH Electronic Ignition Kit is a fully STC'd kit for most Lycoming Counter-rotating 4cyl engines installed on twin engine aircraft. Replacing one magneto with the EIS-41000TLH will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000TLH adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TLH are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Kit includes: all the required parts to replace one direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. EIS-41000TLHIC Twin Engine Aircraft; Lycoming 4cyl Engines, Counter Rotating Impulse Coupled Magneto Replacement The EIS-41000TLHIC Electronic Ignition Kit is a fully STC'd kit for most Lycoming Counter Rotating 4cyl engines. Replacing one impulse coupled magneto with the EIS-41000TLHIC will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, improved high altitude performance and better starting performance. The EIS-41000TLHIC adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TLHIC are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Note: hand propping with an electronic ignition system is not recommended. Hand propping aircraft is a very dangerous activity and is never recommended or advisable. Kit includes: all the required parts to replace one impulse coupled magneto in most 4cyl Lycoming, counter rotating engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Installed on a ‘62 Mooney 350 hours ago and still loving it. Easier cold starts, strong high DA takeoffs. A bit more complicated to install than the Surefly with additional control boxes to find places for.
Improved high altitude climb and fuel burn. Easier starts along with a smoother running engine makes this system a good deal.
Installed this unit on my Piper PA-28. The unit just stopped working and despite working with the manufacturer on repeated attempts could not get it working. After awhile the manufacturer just stopped answering our calls. Reinstalled the original Slick Mags and the plane has run just fine! This was a several thousand dollars mistake.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the STC and related documentation are sent with each kit. The AML can be found by going to the "Documents" tab of this web page.