This optional adaptor is designed specifically for use with Rotax engines for hooking your CarbMate / SynchroMate to a 912 or 914 series Rotax Aircraft Engine.
The 2 x hoses are both 6 feet long. The connection points to each carburetor are easily made at the crossover tube between the two intake manifolds (separating the carbs during synchronization). When one side of the crossover tube is removed, you are left with a male elbow and a female hose. The inside diameter of the hose is 11mm or 7/16” This way, one carb is hooked to the CarbMate at the elbow on the intake manifold, and the other carb is hooked up at the hose on the compensating tube which is hooked to the other intake manifold. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Rotax Adapter With 2X6Foot Hose Ts-400
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
It will work for a 582, but you'll have to remove the brass fittings from the black hoses.