THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE

Aeroduct SCAT-3A 11Foot Piece

$113.85/Each
Part# 05-12932
DescriptionIDPNDash No.
Ducting SCAT/11ft piece7/805-12932-3A

Overview

“SCAT” - “SCAT” type ducting has the same type construction as “CAT” except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65° to over 550°F. Not recommended for negative pressure applications.

Sold in full length only - cannot be cut to size.

Features: Lightweight and extremely flexible. Short sections, which are normally unusable, can be joined together to form a continuous length.

Diameters not listed are available as a special order in full lengths only. Order CAT 2-3/4" diameter for Whisperflow air vents. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 12 ft, contact sales to confirm availability.

Other Ducting Types
  • “CAT” - “CAT” type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neoprene impregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

    Click Here for CAT Ducting

  • “CEET” - “CEET” type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air applications and for conveying fumes at temperatures ranging from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

    Click Here for CEET Ducting

  • “SCEET” - “SCEET” type ducting has two plies of silicone rubber-im pregnated fiber glass, similar to SCAT except wire be tween plies. Ideal for use in conducting extremely cold or hot air at temperatures from -80° to over 550°F, and for conveying fumes. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

    Click Here for SCEET Ducting
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Wish I could give it 6 stars the extra one for the shipping packaging. Opened it in front of my wife and 11 feet of tubing shot out of the 3 foot box. Better than the snake in the can thing.

Micren D
May 24, 2024

none

Javier A
March 2, 2021

Good product. Although cheaper, I believe the Vena hose is actually metric and at least in the one inch size doesn’t fit as well as this does on standard fittings

Dan
February 10, 2021

good price, shipping OK

Susan T
November 24, 2020

Great product fast delivery

Ian H
October 19, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: How long is a Full Length of Thermoid Aeroduct SCAT ducting?

Full factory lengths from Thermoid are 13 feet.

Q: Does Aeroduct or Scat duct have a shelf life?

Per the vendor there is no shelf life but there is a warranty of (1) from mfg defects.

Q: Is Thermoid Aeroduct FAA Approved?

No, this meets the requirements of FAR 25.853 (a) but is not specifically FAA Approved. Please discuss certified aircraft install with your A&P mechanic.