1-877-4-SPRUCE | info@aircraftspruce.com
Aircraft Spruce & Specialty Co.
 
 
THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE
Home / Airframe Parts / Ducting /Aeroduct SCEET-4 Ducting 1 11Foot Piece
Main Image

Aeroduct SCEET-4 Ducting 1 11Foot Piece

0 Reviews 2 Answered Questions
$176.75/Each
Quantity
Add to Wishlist View More In This Series →
Part# 05-11855
DescriptionIDPNDash No.
Ducting SCEET/11ft piece105-11855-4

Overview

“SCEET” - “SCEET” type ducting has two plies of silicone rubber-im pregnated fiber glass, similar to SCAT except wire be tween plies. Ideal for use in conducting extremely cold or hot air at temperatures from -80° to over 550°F, and for conveying fumes. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

Sold in full length only - cannot be cut to size.

Features: Highly flexible and can be easily installed around obstructions and sharp bends. Has less friction loss than similar non-lined ducting.

Diameters not listed are available as a special order in full lengths only. Order CAT 2-3/4" diameter for Whisperflow air vents. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 12 ft, contact sales to confirm availability.

Other Ducting Types
  • “CAT” - “CAT” type flexible hot or cold air ducting is extremely lightweight and highly flexible. Short lengths can be joined together to form a continuous length. Made of a single ply black neoprene impregnated fiberglass with a spiral copper coated steel wire inside and wrapped with fiberglass cord on the outside. Suitable for conveying fumes and air a temperatures from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

    Click Here for CAT Ducting

  • “SCAT” - “SCAT” type ducting has the same type construction as “CAT” except with red silicone rubber impregnation. For use in conducting extremely cold or hot air with temperatures from -65° to over 550°F. Not recommended for negative pressure applications.

    Click Here for SCAT Ducting

  • “CEET” - “CEET” type ducting has two plies of neoprene-impregnated fiberglass, similar to CAT except wire between plies. For use in hot or cold air applications and for conveying fumes at temperatures ranging from -65° to over 350°F. Not recommended for handling liquids or highly abrasive materials, or for negative pressure applications.

    Click Here for CEET Ducting
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Submit a Review

Q&A

Submit

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Hi there, I hope you are doing well. We need various sizes of the THERMOID AERODUCT SCEET DUCTING. IN: 2, 4.5, and 5. I am wondering if you can provide certificate of conformance along with the order?

Yes, certificate of conformance can be furnished on Thermoid ducting if requested at time of order submission.

Q: Does (Aero Duct) CEET or SCEET meet FAR Part 25 flammibility?

Yes, this meets FAR part 25.

View in Catalog

View Image View in Catalog