THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE

A-820 Control 96 Black Knob

$167.75/Each
Part# 05-09496
MFR Model# A-820-BL-0960

Overview

The A-820 friction lock control is similar to the A-800 control but with a solid wire end like the A-790 control. With Teflon™ liner. Travel: 3-3/8". Knob styles and measurements same as for A-800.

Made in USA
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

A very well made product, looks like it will last for very long time. Very pleased with this unit.

Chris B
November 26, 2017

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the shortest length I could cut these friction lock controls back to? I would like one to operate a bellcrank behind the firewall. Regarding Part # 05-09436

The flexible housing is approx. 5-3/8" from the panel mounting point. The cable can be cut at that point, but you will need to cut longer than the 5-3/8" for the inner cable to attach it to to part / bellcrank.

Q: Could you please provide the weight of this control? Black knob / 36-Inch (05-09436)

The approximate weight of this control is 0.7 lbs.

Q: Can you please confirm the outside diameter of the cable housing and of the inner wire for the A-820 friction lock control?

The housing has a 1/4" O.D. and the inner wire is .078".

Q: What sized hole should I drill into the panel where the panel nuts lock the housing into place?

The A820 requires a 1/2" hole in the panel to secure the knob end of the cable to the panel.

Q: How do you clamp this A-820 friction lock cable? The 05-03287 cable clamp says specifically it will not work on the A-820. I am unable to find any other resources on your website. Thanks, Matt

The Cable Safe, P/N:05-16250, or Cable Safe II, P/N: 05-16252, can be used with an A-820 cable.

Q: Do you have exact dimension from flat surface mount and attache area centre of groove or dimension are from flat surface mount to end of cable?

It is 36" from the panel mounting point to the tip.

View in Catalog

View Image View in Catalog