Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
RAM System iPad Mini 1 / 2 / 3 To Yoke Mount Kit
FREE Shipping
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
Kit Contains RAM Holder for Apple iPad Mini without Case (PN 11-11250) RAM Adapter Round Base with Ball (PN 11-07069) RAM Double Socket Arm for 1" Ball Bases (PN 11-01255) RAM Yoke Base Tough Claw with 1" Rubber Ball (PN 11-12930) |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Reviews
This RAM mount is inexpensive and totally flexible. Great product.
Verified Purchase
RAM System iPad Mini To Yoke Mount
Excellent
Pleasant experience with my order, updating delivery and product works as advertised. I will continue doing business with aircraftspruce folks !
I installed the mount in a 1978 Cessna 172 at it works perfect with no problems. I would buy again.
Bought the kit for my Yankee. Works as advertised. Happy with the purchase.
Fits a Piper Cherokee bow tie yoke perfectly and very easy to install. It was nice to buy all of the pieces as a kit to ensure compatibility. Shipping was (as usual) on time and well packaged.
Fits perfectly on the yoke in my AA5B Tiger. Doesnt interfer with my instrument scan and can be adjusted to limit sun glare.
As crowded as instrument panels are becoming the IPad mini yoke mount means every things remains visible. With foreflight as a moving map I feel I have complete situtional awareness.
Wish it would hold my iPad in its case.
Verified Purchase
RAM System iPad Mini To Yoke Mount
The ram mount arm is to short to fit under the yoke on a Cessna 182 so you can tilt it up to see it. If you try to mount it on top, your instruments are blocked.
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the manufacturer, the Ram Yoke Mount will work with a 1964 Cessna 172 and the Ram holder for Ipad mini supports all current Ipad mini models that have been released at the time of this posting.
No, this iPad Mini cradle is intended to hold the iPad Mini by itself. It will not work with a case or skin.
Yes, the Ipad mini versions 1-3 are all the same size so the clip will fit. The yoke mount is adjustable to fit most applications.
All you will need to do is loosen the clamp on the 3-1/2" arm and rotate the device. Once you have the desired orientation, tighten the clamp and it will hold in place in that orientation.
Yes, this kit will fit the iPad Mini 2 without a case or sleeve.
No, for the iPad Mini 4, order the following part numbers: 1 x 11-14148, 1 x 11-07069, 1 x 11-01255, 1 x 11-12930.
This system has an adjustable yoke clamp. It be clamped on rails from 0.625" - 1.5" outer diameter. There is no specific aircraft application guide, however, with this wide of a clamping range, it can work with almost any aircraft yoke.
Yes, because the RAM system uses ball joints, you have nearly total rotation capability from the joint to the iPad. This should work fine.
No, for the iPad Mini 6, you will need cradle part # 11-14148, as well as the rest of the items in this kit to hook up to the 172: part #s 11-07069, 11-01255, and 11-12930.
We recommend Part# 11-11248 for the iPad Mini 5 with Otterbox case. You would also need 11-01255 & 11-12930 to complete your system.
