Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Randolph 345 Acid Proof Battery Box Black Gallon
MFR Model# 20-345-4
FREE Shipping
Overview
 Battery Box Black Paint is an asphaltic coating used to provide protection from battery acid in battery boxes and compartments. It is generally applied with a brush or roller to any metal area that may be exposed to leaking battery acid. Shelf life: Guaranteed 2 years from date on manufacture in sealed container in protected storage. Coverage: 225 square feet per gallon with one coat. Mixing: Stir well before use.Thinning: Use out of the can. If thinning is necessary, thin five parts paint to one part 286 Nitrate Thinner. Application: Apply with a brush. Three coats will provide the best possible protection to epoxy primed metal surfaces. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Documents
- MSDS (PDF)
Reviews
The paint was easy to track down, and order. I received it very quickly. Thank You
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
An epoxy primer is recommended by the manufacturer. We offer epoxy primers from PTI Products, Poly Fiber, and Randolph. A search on our web site for epoxy primer will return the relevant results.
The material has a 4 year shelf life. The customer must seal and store properly for full shelf life once opened.
Per Randolph: cold and damp will impede any coating from drying. You can give it a week to be safe but there is no guarantee. Using a little heat might be the best help.
The vendor recommends applying to an epoxy primed surface. It should work with zinc primer but it is not per the vendor recommendations.
The preferable time would be 7-days at 70 degrees of 5-days at 80 degrees.
Gasoline can degrade it.