Description | PN |
---|---|
Aircraft Rivet Gun #2602A | 12-18340 |
With this popular 2602 Rivet Gun, it's now much lighter and features parts that are interchangeable with Chicago Pneumatic X-Guns. Of course, it still has the same great control that has made our 2602 gun so popular. Excellent teasing throttle for slow starts (so that you don't work harden the rivet before it is set), and enough power to drive 3/16" aluminum (1/8" steel) rivets. This gun is so controllable you can properly buck rivets as small as 3/32" or as large as 3/16". This tool is recommended by many of the kit manufacturers such as the RV-4, Thorp T-18, and the Midget Mustang. 0-2600 BPM, 3CFM required at 90 psi, .401 shank. 4lbs shipping weight. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Work as expected. Used it on -5 and it worked perfectly
Aircraft Rivet Gun #2602A
Works great! Trigger is sensitive to a lite touch. Would recomm end to others.
Aircraft Rivet Gun #2602A
Really easy to use
Aircraft Rivet Gun #2602A
Excellent rivet gun. Not too heavy, easy to use.
Aircraft Rivet Gun #2602A
Aircraft Rivet Gun #2602A
nice gun
I was disappointed that a swivel fitting or any fitting didn’t come with kit (as a kit is usually complete unit) which is what I thought I’d ordered. Now more shipping costs will be incurred.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per the vendor, this gun is equivalent to a 3x gun.
This will do most solid rivets. You will need to regulate the air control at the gun for each type and size rivet being used.
These are made in the USA.