Broadband and rugged antenna designed for DME or transponder use. Antenna assembly encased in a glass reinforced polyester molded shell. Standard two stud mounting configuration. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
MODEL CI 105 DME / TRANSPONDER | |
Electrical | |
Frequency | 960 to 1220 MHz |
VSWR | 1.5:1 960 to 1220 MHz 1.3:1 1030 to 1090 MHz |
Polarization | Vertical |
Radiation Pattern | Equivalent to 1/4 wave stub |
Impedance RF | 50 Ohms |
Resistance DC | Open Circuit |
PowerRF | 2.5 KW Peak |
Mechanical | |
Weight | 0.24 lb. Maximum |
Height | 3.23 in. Maximum |
Material | Molded Radome |
Finish | Polyurethane Enamel |
Environmental | |
Temperature | -54ºC to +55ºC |
Altitude | 70,000 ft. |
Air Speed | 400 Knots TAS at 25,000 ft. |
Federal Specification | |
RTCA Environmental | DO-160C |
FAA TSO | C66a, C74c |
Shipped quickly.
Comant CI-105 Dme Transponder Antenna BNC
Was easy to install, worked as expected.
Comant CI-105 Dme Transponder Antenna BNC
Comant CI-105 Dme Transponder Antenna BNC
I purchased this to use on an experimental after installing a GTX-327 and not realizing that the original monopole antenna was not compatible with the 327. This one had the quickest shipping of all blade antennas on aircraft spruce. red tail or E05 would have worked fine otherwise. This antenna passed the transponder test on the first attempt.
Comant CI-105 Dme Transponder Antenna BNC
good deal
Comant CI-105 Dme Transponder Antenna BNC
Quality product at a fair price.
Comant CI-105 Dme Transponder Antenna BNC
Comant CI-105 Dme Transponder Antenna BNC
Was wanting to purchase Comants Experimental version of this Transponder Antenna but there was a long waiting time so I opted for this more expensive certified model. At $160 think it’s bloody mean of Comant to NOT include the washers and nuts for installation.
Comant CI-105 Dme Transponder Antenna BNC
I like the fast service and talking to someone that knows what they are talking about. Dale
thank you for keeping these in stock, I think I order at least 1 a week!
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes the CI-105 is a standard transponder antenna and can be used for both mode C & S transponders.
Yes, it is a female BNC. You will need to order a male BNC based on what type of coax cable you use (either RG 142 or RG 58).
Typically 3 feet is a good distance between antennas.
Yes all antennas need a ground plate. Normally the height of the antenna should be the diameter of the ground plate but larger is better.
Yes, this antenna is compatible with all aviation transponders. The ground plane can be as simple as foil tape part number 11-12900. Hardware not included, only gasket.
No. This antenna is meant for use on the bottom of the fuselage only.
Yes, this unit can be used with all transponders and is approved by Garmin for usage with the GTX345. It includes the required gasket.
No, you do not need to replace it. This statement is more for builders who currently do not have an antenna.
Yes, part # 11-17965 will work with the Garmin 230 ES.
Yes, this will work for your GTX 345 per the manual.