Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Q: Is the Garmin GI 275 certified for class III aircraft?
Although there is a version that is approved for CLASS III aircraft. This particular part number, part # 11-17861, is not.
Q: Are you going to post the Install Manual?
Per Garmin: The installation manual can be released after the purchase of the unit. You can send your request to avionics@aircraftspruce.com after completing the sale.
Q: No KLN90B interface (ARINC? 422?)
The list of applicable interfaces is posted on the web page. The KLN90B is not a compatible unit.
Q: Which GMUs are compatible with the GI 275 for the HSI display function?
Per Installation Manual Rev3/Pag 1-5: The GMU 11 is compatible with the GI 275.
Q: Will this GI 275 work with STEC 30 or 50 autopilots?
Yes, per the Manufacturer installation manual Rev 1 , Page C-11 this unit is compatible with the STEC 30 and 50.
Q: Does the GI-275 have to be installed by a Garmin dealer or can my shop install this unit?
Versions of the GI 275 that we sell are able to be installed by an A&P or Avionics Installer. Other versions will require a Garmin Installer. This CDI / MFD model and the EIS models can be installed by an A&P.
Q: Can the GI 275 CDI / MFD base version be combined with GAD29 to have the HSI function?
Simply adding the magnetometer does not made it the HSI version. As it must be programmed by the manufacturer to include the internal ADAHRS. However, the magnetometer will be needed when purchasing that configuration.
Q: Does the GI-275 provide required annunciator function for 430W installations?
Per Garmin, it will not provide annunciations for the GNS430W.
Q: Glideslope - ILS Source this will only work with antenna p/n 11-17931 or 11-15700? i want to landing on ILS APPROACH. What do I need for this?
The GI275 only accepts a backup GPS antenna.
Q: Can a GAD29B be added to this GI 275 unit to support Century IIB autopilots?
This version of the unit does not have support for interconnection to an Autopilot.
Q: Can the vacuum system be removed if I install the Garmin GI 275? If yes, under what conditions can it be removed?
The vacuum system can only be removed if there is nothing depending on it to function. The installation of the GI 275 does not automatically mean the vacuum system can come out.
Q: What other Garmin equipment do I need to use the GI275 as a traffic source?
An ADS-B IN capable unit is required such as a GNX375 or GTX 345.
Q: Can I transfer a flight plan from my fixed assembled and wired Garmin Area 660 to a GI 275 and does the GI 275 then works as or like a GPS converter for my S-TECH 50 AP?
Per Garmin there is no compatibility between the two units.
Q: Can I install GL 275 and connect to Avidyne 550 radio?
PER GARMIN: No, The Avidyne 550 is not on the compatible list.
Q: I havent found a specific reference. Will the GI 275 perform flight plan transfers between Pilot/Foreflight and a GNS-430W?
Per the manufacturer: The Flight Plan Sharing feature of the GI-275 will allow the Connext feature of the Multifunction Indicator (MFI) to serve as an access point for sharing of flight plan information from Garmin Pilot to an external navigator. However the GNS430W does not have this capability.
Q: Do you need an outside air temperature probe? And if you do, does it need to be the Garmin GTP 59?
Per Manual - The only OAT Probe listed in the Manual Rev 1 is the GTP 59. However it is not required for the CDI version but required for other versions.
Q: Does the Garmin GI 275 mandate a GPS source if only using it as a AI?
Per the manufacturer, a GPS source is required in order to have complete function of the AI mode.
Q: Do I need a backup attitude indicator when I install a GI 275 ADAHRS and a GI 275 Base?
If you install a GI 275 ADAHRS and a GI 275 Base, then you would need a backup attitude indicator.
If you install two GI 275 ADAHRS units, then you will not need to retain the old attitude indicator, as the inclusion of ADAHRS on the #2 GI 275 allows it to become the backup ADI should the #1 unit fail.
Q: When configured as an MFD, will you still have CDI capabilities? In other words, can I replace my sole CDI (GI 106A) with the GI 275 MFD and still have CDI capabilities when needed?
The MFD has a Knob that allows to switch between the pages of capabilities with the unit. When installed as a CDI, the GI 275 flight instrument, when paired with select VHF Nav radios or GPS navigators, can serve as your primary indicator for making, adjusting and tracking course selections.
Q: Will this integrate with my G1000 GPS position source and GFC700 A/P? Or would I have to install yet another antenna? Trying to get rid of my electric gyro backup AI.
The compatibility chart does not list the G1000 GPS or the GFC 700 to be compatible with P/N 11-17861.
Q: Can the GI 275 be paired with the Appareo Stratus for ADS-B in, AHRS, and GPS source for navigation?
No, they are not compatible.
Q: Can the GI 275 act as both a CDI & MFD? Or does it only do one or the other?
The GI 275 Base variant can be utilized as both a CDI and a MFD.
Q: Can you use a GDL-88 as an ADS-B input source?
No, the GDL 88 cannot be used with the GI275.
Q: Will this work with a non waas gns430/530?
No it will not interface to those GPS units.
Q: Does the Garmin GI 275 Pilots Guide come in hard copy?
No, these are only available in PDF format now.
Q: Is the Garmin GI-275 FAA TSO Approved?
Yes, this has TSO/STC certification.
Q: What is included with this kit? Is the GMU-11 included or do you need to purchase it separately?
This kit does not include the GMU11 as it is not the AHRS version of the unit.
Q: What ADSB in data link will work with this GI 275 unit?
There are a few units that interface with the GI 275 such as the GTX 345 or the GNX375.
Q: If I install this unit as a cdi in my nav 1. Can it be also used as an mfd for the function of an engine analyzer legally if I keep my analog engine gauges? Pa28 140. If so what other components are needed to use the cdi/mfd as an engine analyzer?
It will not function that way. The Engine analyzer is a completely different unit internally.
Q: Is the basic model capable of function as ADI using the GPS 175 internal AHRS (via HSDB ethernet)?
No, it is not capable of ADI function.
Q: Is it capable of receiving navigation from GPS175 to work as CDI. If so, is possible to switch between CDI and attitude indicator screens in flight (considering PN with internal AHRS)?
No, this cannot switch. We only sell the CDI version, the ADI is another model that can only be sold by the avionics shop doing the install. Yes it will work with a GPS175.
Q: Is this Garmin GI 275 for certified aircraft, the PA-30 in particular?
Yes, this is FAA Approved for certified aircraft. Please refer to the STC and AML documentation for specific aircraft applications. If you do not see your aircraft listed, we recommend speaking to your authorized avionics installer to determine if this can be legally installed in your aircraft.
Q: I currently have dual G5 in AI/HSI configuration in a C172 with the HSI controlling GFC500 autopilot. Will additing a single GI275 allow me to remove the Altemeter/Airspeed/VSI/Turn&Bank indicator?
Per Garmin: "A GI 275 can not be installed with a G5. If the customer is wanting to remove the standby instruments , then a dual GI 275 ADI and HSI would have to be installed. Both units would have to be the ADAHRS versions."
Q: Can I remove my OEM airspeed indicator?
Not with this version of the Garmin GI 275, no.
Q: Will the certified CDI/MFD unit control a GTX 33ES remote mounted transponder?
Per the manual, the GI 275 will not the control the remote transponder.
Q: Why is it not possible to by the Attitude Indicator (AI/ADI) from your website?
Garmin restricts certain models of the certified GI 275 from over-the-counter sales. Only the CDI/MFD and the EIS are permitted to be sold over-the-counter. All other models must be purchased from the Garmin dealer that will be installing the units.
Q: Is the connector included with the GI 275 Part# 11-17861?
Yes, this comes with the connector kit 011-04809-00.
Q: Would I need a GAD 13 interface and a GTP 59 probe to get OAT, TAS and Winds displayed?
Yes, you can get them in a kit, please see part # 11-17436.
Q: Is there a back up battery available for the GI 275?
Yes, our part number 11-19100.