Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
MGL Vega Rpm-1 Universal Engine / Rotor Rpm Indicator
MFR Model# RPM-1
FREE Shipping
Overview
|
The RPM-1 for Experimental / LSA aircraft is a 2 1/4” sunlight readable color display instrument providing two universal RPM inputs that is primarily intended to measure engine and/or rotor RPM. The display can be configured to display single or dual RPM or it can be configured to display engine and rotor RPM as used in helicopters and gyroplanes. The RPM-1 also has a maximum values display screen as well as a handy magneto check function. The RPM-1 includes a number of timers such as a Hobbs meter which can be set to the current engine time and is also password protected, an engine running and flight timer as well as a programmable maintenance timer to schedule routine engine maintenance. The RPM-1 can also be interfaced via the CAN bus to an external RDAC unit (Remote Data Acquisition Unit). This allows for easier installation as the RDAC unit is normally mounted in the engine compartment. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Features
- Single or dual RPM display screens
- Dedicated dual rotor / engine tachometer
- Includes a settable Hobbs meter which is password protected
- Includes an engine running and flight timer
- Includes a programmable maintenance timer for scheduled routine engine maintenance
- Includes a magneto check function
- Records maximum RPM reached for each channel
- External RDAC interfacing via the CAN bus
- An external output activates when a high alarm condition has been reached
Documents
Reviews
Very pleased. Many features, more than just a tach. Easy to connect and program.
Verified Purchase
MGL Stratomaster Vega 2-1/4 RPM Color Indicator
This is a good tach. Very readable in bright sunlight. Simple enough to set up. Using the magneto check function on every start -- it is very useful. Could stand a single-channel unit to save a dollar or two but this will do. Running on a Hirth 3203 in parallel with a Grand Rapids 2000. Replaced the larger of the two MGL tachs (Blaze series) with this smaller one to save some space and this is a keeper.
Verified Purchase
MGL Stratomaster Vega 2-1/4 RPM Color Indicator
Installation was straight-forward. I had to connect a resister for my Hall effect sensor. I find that a bit hokie. They should place the resistors internally and have them selectable for the various values cia the set-up menu. I wish the sweep gauge had some number on the circumphrance like you would have on an actual analog gauge. Overall I like it.
Indicator does not work off of the magneto switch lead as indicated in the instructions. The picture of the installation on the MGL web site is wrong. They show the P lead connected to the vent screw on the back of the mag, not the switch lead as intended. When I contacted MGL I was told that I needed the Hall Effect Sensor. The instructions for setting the number of pulses is misleading. I had to set the pulses 15 times higher than the calculated number to get a reasonable indication. It would be impossible to set this up without a hand held tach.
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per MGL: Not sure on that model, however it will work with most electronic ignition systems but may need extra external components such as resistors in order to set the signal up properly.
