WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Load and clear com,has internal switches for different mics,comes with a cord
Comtronics Intercom Ultra COMMII
The ultra com is a good product and works.
Comtronics Intercom Ultra COMMII
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
No, they are called an Ultralight plug (where the U/174 is a helicopter style plug). It is .25 single plug used in Ultralight and glider applications.
No, the radio port is a 3 pin din connector.
Yes, as long as the impedance is 300 ohms the M-87 dynamic mic will work.
Yes, this Comtronics Ultra-Com II Intercom will work with the A-24 and David Clark headsets as long as the David Clark headsets have the ultralight style plugs.
No, Comtronics intercoms do not hold FAA TSO approval.
Per the manufacturer you can use 4014-D for the ultra-com intercom, which is our part # 11-15718.
This will work, however you will require an interface cable created by the manufacturer. For example, 11-15725 or 11-15726.
Yes, it can work but you will need a few adapters to make it work. Comtronics works off of a single .206 plug 11-00685 GA to Comtronics plug and 11-07712 push to talk.