Model # | Description | Part No. |
---|---|---|
WRM-10 | Lexam Dome | 11-03257 |
Rotating Beacon Replacement- The round mechanical rotating beacon was used on the vertical fin of all Barons from 1961 thru 1969. Models using this light are 95-55 (1961), A55 (1968-1969).
Note: The B55 Baron continued to use this beacon until production stopped in 1982. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Good clarity and quality but no gaskets.
Whelen WrM10 Red Lens
the lens fit perfectly. Beacon is clear and bright.
Whelen WrM10 Red Lens
Works great but don’t buy on what’s pictured you only get lens
Whelen WrM10 Red Lens
Product was rushed out in a timely manner to allow an overnight delivery to keep on flight schedule.
Worked great
Great value
This whelan replacement lexan dome is a perfect replacement for my cracked and hazed rotating beacon dome on the top of my PA 28-140 vertical fin. You will need to re-use the old dome rubber screw seal inserts for the proper install as these are not included with the new dome.
WRM-30 gasket is a perfect fit for sealing the lexan dome.
Surprise! Fits perfectly on my Cessna 182F. I also went with the new gasket -- the old one had disintegrated.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, there is. To convert to LED from the old Beech Rotating beacon use part number 11-09908 (14V) or 11-07619 (28V).
The height is 2.68 + or - .03". The OD of the base is 4.23".
The outside dimension is 4.23" in diameter.
Yes this will fit WRM-24.