Worked like a charm. High quality and recommended for that one nut that needs this.

James L Verified Purchase

Rapco RA716 Vac Pump Wrench

I dont know how we would have gotten the vacuum pump replaced without this wrench. Even though it is a 12 point crow foot design we still had a bit of struggle with one nut. All because of other stuff in the way, not any fault of the wrench.

Bryan L Verified Purchase

Rapco RA716 Vac Pump Wrench

Can do the job without it.

Richard M Verified Purchase

Rapco RA716 Vac Pump Wrench

Tool works as advertised. Also, much less expensive than the snap-on tool that does not work.

Steven B Verified Purchase

Rapco RA716 Vac Pump Wrench

Great tool! Saved me a lot of time and aggravation. Worth every penny!

Jerry W Verified Purchase

Rapco RA716 Vac Pump Wrench

great tool for a great price! fits great and did the job!

Hardy M Verified Purchase

Rapco RA716 Vac Pump Wrench

Finally buying one for myself, but others’ tools have been stellar. Glad to have mine finally.

Connor W Verified Purchase

Rapco RA716 Vac Pump Wrench

On the TIO 540 was not really applicable

D W Verified Purchase

Rapco RA716 Vac Pump Wrench

That lower left nut on the vacuum pump is a bear to get at. This gets the job done.

Kevin J Verified Purchase

Rapco RA716 Vac Pump Wrench

I’ve changed many vacuum pumps in my time, and this tool is a game changer. I’ve bent and welded tools together to get to that one last nut…you know the one! This wrench is all I’ll ever need for the next vacuum pump replacement.

Joseph G Verified Purchase

Rapco RA716 Vac Pump Wrench

A necessary tool for the job, worth its price in work/time savings

Dave R Verified Purchase

Rapco RA716 Vac Pump Wrench

Worked wonderfully to remove vacuum pump from ‘63 Mooney M20P.

Bailey S Verified Purchase

Rapco RA716 Vac Pump Wrench

Works great for breaking / starting nut on o-235

Hayden Verified Purchase

Rapco RA716 Vac Pump Wrench

A must have. PA-32-300, I)-540-K1A5. This tool is a life saver.

Donald E Verified Purchase

Rapco RA716 Vac Pump Wrench

Only disappointment is you can’t use a torque wrench with it. Only needed it for one nut on the back up alternator but nothing else works.

Don E Verified Purchase

Rapco RA716 Vac Pump Wrench

Work great .. same me a headache

David M Verified Purchase

Rapco RA716 Vac Pump Wrench

Makes the tough job workable at a reasonable cost!

Michael S Verified Purchase

Rapco RA716 Vac Pump Wrench

works great

Charles S Verified Purchase

Rapco RA716 Vac Pump Wrench

Perfect tool for the job !!!

Benoit L Verified Purchase

Rapco RA716 Vac Pump Wrench

Great timing from time ordered to time received. Aircraft Spruce still the best place to address your aircraft part needs in my opinion.

Wilbert J Verified Purchase

Rapco RA716 Vac Pump Wrench

Cant believe Ive waited this long to finally order this tool. Now I can leave my custom bent wrench in the toolbox!

Dale A Verified Purchase

Rapco RA716 Vac Pump Wrench

Handy, dont pull your vacuum pump accessory w/o it!

Gary G Verified Purchase

Rapco RA716 Vac Pump Wrench

Great gadget. I didnt know about it until I saw it in the catalog. Saved me a lot of time and labor.

Great service as ususal.

Must have tool if you ever need to replace the dry air pump.

Awesome tool, buy it and save yourself lots of time and aggravation..

I spent 25 years maintaining light aircraft. While I did have to get adept at grappling with that bottom inboard mounting nut, only now that Im retired did I purchase this wrench - 25 years too late! It is a really helpful tool that should be in every tool cabinet.

works great and makes the job very simple

If you are changing a pump GET ONE OF THESE, MANDATORY!!! It is a PITA getting the lower left nut on by hand and nearly impossible to tighten it with out this wrench.....

First time changing the vacuum pump and this wrench made it so much faster. Well worth it.

If you dont have one of these, you will spend hours and aggravation trying to change a vacuum pump. Perfect tool.

Works great in tight areas.

Absolutely necessary tool. Worked great. Has a bit of flex to it so could be a problem if that problem but is stuck.

Needs to be made sturdier with les flex in the shaft.

On Lycoming 360 (180 HP) does work but you cannot tight the lower left 7/16 nut because the tools angle it is too long and touching the engine case that eventually start leaking oil.

Doesn’t work on an O-470-11.

Tool is too long for a Cessna 182.

Andrew Z Verified Purchase

Rapco RA716 Vac Pump Wrench

Worked great after I taking it to the grinder. Wouldnt even fit in the housing of a RAP 215 pump on the bench.

Marshall B Verified Purchase

Rapco RA716 Vac Pump Wrench

Used once and wrench bent. Might be bad run of metal, but it was very weak. Aircraft spruce replaced no questions asked.

It make work on some planes, but not my B model Bonanza 35. It did fit the nut (7/16) but the Handle was too long, distance between opening for nut and first 90 bend was too great and sides of wrench too wide to turn the nut once you were on it. After hacksawing and grinding and using a crescent wrench to turn the wrench, I removed the stubborn top left nut. For me, waste of time and money.

Looks to be good quality but too long for my use. Will not fit between the firewall and the vac pump on an American Champion Aircraft Super Decathlon. 8KCAB.