Description | PN |
---|---|
Electronics International FP-5L Without Pressure (Non-Primary Package) 60Ft | 10-01045 |
E.I. products include all documentation and certifications To further manage your fuel and provide safety the FP-5 displays fuel pressure in .2 PSI increments to 100 PSI. In addition it offers 1 pilot programmable Low Fuel Pressure Warning & 1 Pilot Programmable High Fuel Pressure Warning. These warnings catch your attention by blinking the H/L press. LED. These warnings are emergency warnings and can be instrumented in early problem detection. Features include programmable K factor, programmable fuel weight, and programmable display for gal. or lbs., fuel flow to .1 gal/hr., fuel used and remaining to 1/10 of a Gallon, time to empty to one minute, fuel pressure to .2 PSI, one programmable low fuel alert, one programmable time to empty alert, one programmable high fuel pressure warning. STCD. Size: 2.5" x 2.5" x 3.65"D. 2-1/4" bezel. wt. 12 oz. FFDM-1 Fuel Flow Differential Model |
Two primary features of the FP-5 are a pilot programmable low fuel alert and a pilot programmable low time to empty alert. These alerts catch your attention by blinking the low fuel LED which will turn off when acknowledged by pushing any button or switch. These alerts can be at any time from the front panel of the FP-5. By setting these alerts, the FP-5 becomes a Fuel Managing Co-Pilot, alerting you when it is time to check your fuel levels, switch tanks, compare your time to destination calculations to the FP-5 readings or any other function you need to perform.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
I received my order on time and it was packed great.
Electronics International FP-5L Without Pressure (Non-Primary Package) 60Ft
Very accurate fuel flow meter.
Electronics International FP-5L Without Pressure (Non-Primary Package) 60Ft
Have dealt with E I since they started but have found their products very good but theii customer service and warranty to be very poor
Electronics International FP-5L Without Pressure (Non-Primary Package) 60Ft
Have not installed Fp-5l yet.
Having flown behind the FP-5L for almost 2 years, nothing but 5 star recommendation. Outstanding to have the fuel awareness this fuel flow & totalizer provides. For the Aux function, I installed as EGT probe so I could replace my original Alcor EGT unit. Best part... a pilot can upgrade to a CGR-30, and keep the EGT & fuel transducer already installed, as they are the same part numbers for a specific aircraft. Service and support from EI is outstanding.
This is a great addition to my cockpit. I have an older Mooney with 3 fuel tanks to manage. Two 17.5 gallon and one 14 gallon tank. Connecting this device to the EI voice annunciator and then setting a 4 gallon recurring usage alarm will warn me every time I have used 4 gallons. That gives me 4 warnings on each of the wing tanks, and 3 warnings on the aux tank before I have to switch. Very convenient and much more accurate than a 30 minute timer. The Fuel Remaining is handy to compare with Time Remaining when the wind has been worse that projected, or when you've had to fly low longer than expected, and your fuel situation is closing in on the reserves. All in all a fantastic tool for peace of mind.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the FP-5L can be installed on a certified aircraft please see the documents section for STC listing.
It does come with a fuel transducer and if your aircraft is under 350HP then you will need to order the FP-5L with the FT-60 transducer.
You will need 10-03248.
Per EI: The FP-5L can monitor fuel pressure through our FM-FP module - note that this is not a primary indicator and any existing fuel pressure gauge must be retained. Part number 10-25337.
Per EI: : "FP-5L-60 package includes the FT-60 flow transducer, the FP-5L-90 package includes the FT-90 flow transducer and the FP-5L-180 package includes the FT-180 flow transducer."
Yes. The STC is included with the FP-5L's installation instructions and is also available at no charge from the EI website.