MS3106A12S-3S Circular Connector |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Came as described. It does NOT come with the cable clamp, not sure why. Under accessories they should list compatible clamps instead of having to look through the questions.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the pins are in the connector, you will need to extract them from the connector to attach them to a wire.
Yes, the pins are in the connector, you will need to extract them from the connector to attach them to a wire.
No we do not stock as the male side is attached to the instrument.
This plug has 2 pins.
No, the two part numbers listed are the same part. We do not sell the mating connector, this cannon plug is intended for use with a gauge which has the matting connector attached.
The contacts are a solder type connection.
Part # 11-04969 will work with MS3106A12S-3S.
if the pins are crimped, yes, and we do we sell extraction tools based on the wire size.