Designed for damping resonant vibrations of thin sheet metal, these panels are pressure sensitive, specially compounded polyurethane damping foam with an aluminum foil backing. The adhesive on the foam is protected by a peel-off paper covering. It is an excellent insulator for conducted heat and is an excellent heat reflector. Fireresistant and self-extinguishing per FAA test procedure. Excellent moisture resistance. Resistant to most solvents. Easily applied with only hand pressure for a permanent bond even on rough, irregular surfaces. Used extensively in commercial aircraft and highly recommended for metal home builts. Apply to firewall, fuselage - anywhere a vibration problem exists. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Great product
Our end user was very happy with this product. Excellent forming properties and the adhesive backing is quite robust. We are ordering more.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These panels are approximately 1/4" thick.
These panels are approximately 1/4" thick.
1) We have added the Technical Data Sheet to the web page in the "Documents" tab. It contains all available technical information for the 4014 panels.
2) The thickness of the panels is approx. 1/4" per previous Q+A response. The length and width of the panels can be selected in the dropdown menu contained in the yellow box on the webpage. They are available in 6"x48" (09-30206), 12"x48" (09-30212), and 18"x48" (09-30218).
3) These are priced and sold per panel.
No, this product does not have any FAA Approval.
This material used for interior use, and does meet FAR 25.853, per their tech data sheet. It is not aviation specific. We always recommend discussing with you certified A&P before using or installing any item on an aircraft.