Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Rejex High Gloss Finish Gal
Add to cart for current price
MFR Model# 61004
FREE Shipping
Overview
|
RejeX® is a proprietary thin film polymer coating technology designed to provide a high-gloss / ultra-high-release surface. RejeX is commonly used as a paint sealant providing a better performing alternative to wax-type products for owners who want to maximize protection and shine on vehicles of all sorts, including aircraft, cars, motorcycles, boats and RVs. RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. The product dries water clear, and unlike wax-based products, never yellows. This highly durable coating produces a deep, lustrous shine that outlasts other products by months. This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease. RejeX also provides exceptional UV protection. it is even effective against the dreaded love bugs! RejeX can also be applied to windshields (glass, Lexan, acrylic, etc.) to repel rain and make bugs splats easier to remove. RejeX has recently been awarded the GSA National Stock Number 8030-01-593-8208 for use on all NATO destroyers and cruisers armed with the AEGIS defense system. RejeX contains none of the free silicone oils found in some other polymer products that are known to contaminate paint and cause issues when repainting. PRODUCT NOT FOR SALE OR USE IN THE STATE OF CALIFORNIA |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Application Notes
- As RejeX cures, the polymers cross-link into a crystal-clear, flexible, chemical- and contaminant-resistant film. It is very important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, hard water, cleaners, etc. before it has cured, the contaminants may interfere with the integrity of the film, affecting its visual characteristics and release properties.
- RejeX SHOULD NOT be used on porous surfaces, highly textured surfaces (such as the plastic/rubber trim on some SUVs), oxidized painted surfaces or oxidized (chalky) gelcoat/fiberglass. If a painted / gelcoat surface is worn/oxidized, polish to remove "dead" oxidized paint and gel coat / fiberglass before applying RejeX.
Buffers work just fine for applying / removing RejeX. If you use a buffer, do not apply RejeX with pressure, simply use the buffer to spread out (and/or wipe off) the product. - RejeX can be applied in multiple coats – allowing at least 4 hours curing time between coats – for greater depth of gloss and extended longevity.
- RejeX can be used over existing wax, however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. Waxes can be applied over RejeX, however many of the benefits of RejeX may be negated and the wax finish will typically not last very long due to adhesion limitations. It should also be noted that many waxes (particularly those products described as "restorer waxes") and all polishes contain abrasives, which can strip the thin RejeX film.
- If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Abrasive cleaners, polishes or rubbing compounds will remove the RejeX film.
Instructions
- 1.Shake well.
- 2.Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side.
- 3. After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily.
- 4.Allow RejeX to cure for 8-12 hours out of the elements. The higher the humidity, the faster RejeX cures.
- 5.While it is not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenaciously to wheels, etc.).
Reviews
Rejex is great. We use it for all our detailing jobs.
Verified Purchase
Rejex High Gloss Finish Gal
Easy to apply and buff. Great finish. Finish like smooth glass and great shine. I polished the car first with a battery drill and sponge pad to remove paint swirls and smooth finish. Applied the Rejex by hand and buffed off by hand. Smooth gloss finish. I park inside and wax once per year.
Excellent product! Leaves mirror like finish.
Verified Purchase
Rejex High Gloss Finish Gal
Fast shipping on a product I have used or over 15 yrs.
Been into cars for 50 years, and this Rejex product is the best that I have ever used. I buy it for a few of my friends and they also agree. Great product, keep selling it.
I ordered Rejex from your company as I have been unable to go to the U.S. to buy it because of the border closure. Your price was reasonable and you were the only Canadian source I could find online. Rejex is an exceptional product and I highly recommend it. The order was processed and shipped promptly and I received it within a few days through Canada Post. Call me a satisfied customer!
I am a car guy and car detailer. I have a garage full of car care products. Rejex is by far the best paint protection product I have ever used. (And Ive used a lot of waxes and synthetic paint protection products!) Rejex provides an exceptionally shiny finish and actuals repels dirt. My cars and truck stays cleaner longer during inclement weather. I also use Rejex on my wifes horse trailer, which sits out in the elements year round. It is easier to wash a vehicle that has been treated with Rejex as the dirt, grime, and pollutants wash off easier. Be aware that Rejex is a surface finish and not a cleaner. You need to ensure that the surface is clean before using Rejex. I wash and clay bar my vehicles before applying Rejex. The product goes on easily and it is easy to remove the dried product with a micro fiber cloth. I apply Rejex to the paint, all non-matte trim, lights and glass, with the exception of the windshield. I also apply Rejex to my wheels to repel brake dust. Due to the U.S/Canada border closure I had to source Rejex from a Canadian source as it is not sold in retail stores in Canada. I found the product online at a reasonable price from Aircraft Spruce & Specialty Co.
This product you can apply to all your plastic glass and the paint to protect you around. It helps to increase the clarity of windows by filling in the very small scratches and shed off water droplets by bringing them together which makes them larger and then able to blow off. Make sure you apply correctly and allow At 24 hours to dry. Makes it easier to wipe off exhaust oil and bugs and could even help shed ice a bit.
As advertised: excellent product!
I have a tuned bmw 335 diesel that leaves the back end of a bright white car BLACK. It was so bad, that wiping it off actually left deep scratch marks. To remove the soot, required polish compound and a lot of elbow grease. I had tried various waxes (bmw hardwax, autoglym, carnauba). Regardless the number of coats, soap and water could not remove the soot...until NOW. I read and searched online for a product, decided to spin the dice and try this product out. It did not let me down. I followed the directions and let the product cure as stated. the car accumulates soot/carbon within 150km (1 day travelling for me). with water and washmit, the product came right off! it has been 3 weeks with no degradation of slickness. the rest of the car is as it was day 1 with the finish and dirt flying right off. Must say, skeptical at first but WOW! a believer! Thanks for the great product!
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this is not considered hazardous goods. No problem shipping to Australia via air.
Per supplier: The 12oz bottle covers a 22 foot RV, so at best guess we can say it covers 150 to 200 square feet.
It will certainly help keep the soot,exhaust and oil from sticking to the paint on the belly. It will also make it easier to clean.
If your paint is oxidized you would want to compound and polish it before applying Rejex.
Yes, eventually the degreaser would remove the Rejex. But you should be able to clean the soot off with less aggressive products if Rejex is on the surface.
