1-877-4-SPRUCE | info@aircraftspruce.com
Aircraft Spruce & Specialty Co.
Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE
- Photo may represent series and not specific product
- SHARE
Eastman Turbine Oil 2389 Quart
Packaged Items
SingleCase of 24
FREE Shipping
Overview
| Eastman Turbo Oil 2389 is a 3 cSt synthetic lubricant. Eastman Turbo Oil 2389 is approved against US military specification MIL-PRF-7808L grade 3 and incorporates a level of technology from Type II (5 cSt) commercial turbine lubricants. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Features
- A major advantage of Eastman Turbo Oil 2389 is its ability to limit the formation of vapor phase deposits
- Eastman Turbo Oil 2389 provides load carrying ability well in excess of requirements established by the engine and accessory manufacturers.
- The superior low temperature viscosity of Eastman Turbo Oil 2389 makes it a better product for low temperature application. Many APU operators prefer to use 3 cSt oil, such as Eastman Turbo Oil 2389 for lubrication in order to improve its cold start reliability.
Applications
- This lubricant combines the thermal and oxidation stability of our commercial 5 cSt synthetic lubricant, Eastman Turbo Oil 2380, with the ability to flow at extremely low environmental temperature. In addition, it has gear-carrying ability equal to or better than other approved MILPRF-7808L Grade 3 oils.
- Eastman Turbo Oil 2389 thus affords the military operator the lower viscosity advantage of MIL-PRF-7808L Grade 3 oils while providing the higher quality advantages of the Type II commercial oils, especially with respect to better thermal and oxidation stability.
- Eastman Turbo Oil 2389 has been approved by a wide range of engine and accessory manufacturers for their applicable equipment, including:
- Rolls-Royce Ltd, Rolls-Royce Allison, GE, Pratt & Whitney, Pratt & Whitney Canada, Honeywell, Hamilton Sundstrand, CFMI, MTU, Solar and Turbomeca.
- Please contact our local representatives shown in the Air Eastman website for approval details.
Documents
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Q: What is specific heat for Turbo oil 2389 please?
The flash point is 220 C.
