Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Flange For 2 Inch Ducting
MFR Model# DL-012
FREE Shipping
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
| Accepts 2” ducting on both ends. Helps route ducting through bulkheads, firewalls, etc. Especially useful for getting heat to the back seat of the aircraft. 2-1/2” square plate with 2” tubing projecting 1” from each side. Wt:0.7 oz. |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Reviews
Very well made. Exact measurements.
Verified Purchase
Flange Duct For 2 Tubing
This is a very nice bulkhead fitting. Fits 2 fresh air hose perfectly.
Verified Purchase
Flange Duct For 2 Tubing
This is a great fabricated item that saves me time from doing it myself. Looks well constructed and fairly sturdy although I may consider adding some weld bead at the mounting interface. I ordered 2 and each came from a different location. This one appeared well boxed for shipping, but a corner of the flange was bent. It’s possible the damage was due to it being packaged with their ginormous catalog, since the second one arrived in its own packaging just fine. The alternative is it was pulled from the shelf damaged, which I hope is not the case.
Verified Purchase
Flange Duct For 2 Tubing
All that I needed was a light weight 2 feedthrough airduct connection to feed fresh air from between the inter cylinder baffles and send it to a newly installed high output alternator that I just installed.
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The ID of the mounting holes are .127".
The dimensions of the square flange is 2-1/2"x2-1/2". The distance between the adjacent holes is 2.1".
This will have a 1.97" outside diameter where the ducting will be attached to.
Per Vendor: 2 inch Aluminum tubing with an aluminum flange.
1.935"
