Lamar Voltage Regulator DGR6-1 fits Cessna 150 thru Cessna 210 series aircraft. DGR6-1 is the PMA replacement for DGR6, C611001-0101, C611001-0102, C611001-0201, and VR600. Manufactured in the USA. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Regulator fit perfectly and worked as advertised.
Lamar DgR6-1 Voltage Regulator
A drop-in replacement Regulator for my Cessna 182M model. Stock spade connectors will need to be crimped slightly to grip the smaller spades on this unit. Works as advertised. No warranty registration paperwork provided. Comes with FAA Form 8130-3.
Lamar DgR6-1 Voltage Regulator
As advertised, simple installation
Lamar DgR6-1 Voltage Regulator
Works Great is an easy direct replacement for the DGR6. Highly recommend and about a five minute change out.
Lamar DgR6-1 Voltage Regulator
As advertised. No frills, but worked fine for a C172.
Lamar DgR6-1 Voltage Regulator
5 Minute job to replace old regulator, very smooth voltage charging control. No annoying blips on charge as was apparent on old relay style regulator. Also no annoying blipping sound on head sets. Very Happy with product . Should have done sooner.
Lamar DgR6-1 Voltage Regulator
Quick and easy change out, took less than 5 minutes. No more spiking from old regulator contact s. Very happy with results.
Lamar DgR6-1 Voltage Regulator
Lamar DgR6-1 Voltage Regulator
Works good 😊
Lamar DgR6-1 Voltage Regulator
Ive installed two in the last few weeks-- both worked flawlessly out of the box.
Lamar DgR6-1 Voltage Regulator
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
P/N# 07-01897 is a direct swap for the VR600.
No, it is not adjustable.
No, it does not have an over voltage protection.
No, this does not come with a connector. The connector is an OEM Cessna part.
No, it does not.
Yes this is a solid state regulator.
Yes it is a PMA replacement for the DGR6.
Per Lamar, the DGR6 is not the replacement for C593001-0101.
The manufacturer does not have a specific amp rating on this regulator. They estimate around 4 amps.