Works for a 172 F model

Jack H Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Lots of extras but note these are not structural screw so make sure to order the separate stainless screw kit for the wing fuel tanks.

Nick S Verified Purchase

Stainless Steel Screw Kit For Cessna 172

This is fantastic. Plenty of the most common screws.

Benjamin P Verified Purchase

Stainless Steel Screw Kit For Cessna 172

I needed screws for the cowling on my 59 172 and these did the trick.

Douglas P Verified Purchase

Stainless Steel Screw Kit For Cessna 172

More than enough hardware to replace some corroded screws and washers. Great value for the money.

Leonard C Verified Purchase

Stainless Steel Screw Kit For Cessna 172

The “Screw Kit” is fantastic! My most recent back ordered engine starter order however has met with less enthusiasm as Aircraft Sprice passed the buck to the “supplier” who has yet to contact me!

Richard V Verified Purchase

Stainless Steel Screw Kit For Cessna 172

I use this item for my flight simulator. It was in a perfect condition, when it arrived in Switzerland. Thanks a lot for the super service. This is for me 5 star plus!

Jeffrey W Verified Purchase

Stainless Steel Screw Kit For Cessna 172

NICE AND PERFECT FOE MY 172 M

Bairon M Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Great assortment for that occasional missing screw.

Kevin G Verified Purchase

Stainless Steel Screw Kit For Cessna 172

As advertised.

Robert W Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Nice assortment of items.

Kelly G Verified Purchase

Stainless Steel Screw Kit For Cessna 172

As published.

Federico F Verified Purchase

Stainless Steel Screw Kit For Cessna 172

You wont get screwed with this purchase:)

James P Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Phenomenal product!

Cody C Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Great replacement item, clean up your aircraft

Ed A Verified Purchase

Stainless Steel Screw Kit For Cessna 172

I was mistaken that I had not receive this order. It was received in good order. Thanks.

Worked just fine.

Works nice to have on the bench to replace any missing items

Service from order placement to delivery was quick. The contents were separated in individual bags and then the individual bags were packaged in a larger bag. Neat and orderly. The only thing I would ask for would be a simple diagram as to where each specific screw(s) were meant to be placed. If not a diagram, maybe a small slip of paper in each individual bag ie: “inspection panel screws”.. product is great and service is great.

The exact product I ordered very fast service. I would definitely order from Aircraft Spruce again!

Nice set of screws for a decent price.

What I requested

Has everything needed

This has just about every body panel replacement screw and washer you will need for your 172.

Bag was full of screws and washers!

A great package of screws and washers when dismantling, stripping and repainting aircraft. Most often old screws are rusty or damaged. This option gives new stainless screws without the guess work at re-assembly.

Seems to have all the right pieces. Great to have in the shop.

A great pack of screws and washers used by us at an aircraft re-paint, when flight controls, fairings and panels are removed & painted separately. End result is excellent.

Effect. Surly of all misc screws for my Cardinal!

good kit. Comes with lots of different estructural screws.

Great kit! Everything I needed to replace the old screws on my plane.

Worked great

Didn’t have this for my champ so I bought this package for when you need to replace a couple of screws. Looks like it will work fine.

Fast ship, good item,

Great kit for 150!

Perfect!

This is much better way of having al the screws and bolts,than going out trying to find them individually

A great kit. Had everything I needed to replace panel hardware that was needed.

Great product and quick delivery!

All the screws needed for the schools Colt.

The perfect pack of replacement screws for fuselage of Pitts or even Christen Eagles.

This is a must for a PA28 owner, along with 100 nylon washers. Shipping was extraordinary I paid for it, but my order was here, complete in just over 36 hr.!

Screws seem to just go missing any time I remove a part from my plane (maintenance, annuals, etc.), so getting a complete set of proper stainless screws saved me from having to root through my mechanic's hardware bins, sheepishly looking for a replacement screw that I just removed the day before. I bought a $6 parts organizer tote from Canadian Tire to hold all the different sized screws for my 1963 PA28-180, and now it's a simple matter to locate a replacement for a lost, stripped, or corroded fastener.

nice, but cant see kit

Not a bad product. looses a star because there are leading edge row fuel cover screws. Also incomplete number of washers for the panel right above the doors. I have C 172m.

Not use yet

Manuel M Verified Purchase

Stainless Steel Screw Kit For Cessna 172

Just what I wanted, wished bag was labeled to exactly what was in each bag for easier replenishing.

Some screws were replaced with the screw kit but not sure if it includes what I need for the entire airplane. Seems incomplete.

Jerome T Verified Purchase

Stainless Steel Screw Kit For Cessna 172

I was trying to purchase the screws that hold the front of my Mooney Cowl to the bottom bowl there are only 6 of them. I tried to order the right ones myself and struck out. Turns out I needed to order an entire bag of screws to get the right ones. I am thinking most of these are going to sit in my workshop forever but I got about a dozen of the ones I needed. Ordering individual pieces of hardware seems to be more difficult than it should be. But once I received the bag I did have the set I needed.

Gving three stars due to kit being a little too universal....it appears to try and cover all years of the C172, or just certain years. I was able to use roughly half or less of the screws provided. Making sets available that are a little more year/generation specific would be nice.

What is the purpose of putting together a kit but not stating what it includes? How is the purchaser to know whether it meets his requirements? This kit includes a huge number of the truss head screws used on C-172 inspection plates, and quite a few AN526C-632R8 1/2-inch truss head machine screws used to fasten the top and bottom of the cowling together behind the spinner. However, I need at least two of the latter that are 3/4 for the outside corners of the cowling the 1/2 ones are not long enough at that location. So now Im still looking to replace two specific screws that are very cheap, paying ten times their cost for shipping, when I could have included them in my order if I had known they werent in the kit.

Parts are excellent. Unfortunately, the catalog does not list what parts are included in the kit and the individual bags are not marked for what they contain. I have way too many of some types of screws and not enough of others. Some of the most needed screw types only included 5 or 6 screws. Id like to order additional screws to make up for the ones that didnt come with enough screws but since the screws are not labeled I cant. Kit needs more screws and better labeling.

Bought it to replace some exterior screws. Great idea but not a one screw matched the ones I was looking to replace. Im sure many of the other matches but mine didnt. I have a Cessna M337B or O-2A.

A good selection of screws. I was hoping that the 182 set would contain what I need to replace the exterior screws on my Cessna 182S during an annual. It didnt have nearly enough flat-head screws to replace all the screws on my access panels, and had a huge excess of oval-head screws. There were also a few access panels which used screws not found in this kit (such as the ones on the flaps). My guess is that pre-restart 182 models had fewer countersunk holes on the outside, and this kit is optimized for them. Nevertheless, if you just want some spare screws to replace the ones which inevitably fall out, this is a good kit to have on hand.

The kit is not complete. There were no screws for the interior side panels

Only includes one size of sheet metal screw, while many different sizes are needed on my super cub.

I purchased kit #04-01000 for the Cessna 150/152 and took them over to my A&P/IA to review. He said he would not use them as the #10 1/2 (5ea), #8 1/2 (about 100ea) and #6 1/2 (20ea) were all Truss Type A and are a more course thread than the Type B. He will not use a Type A screw with Tinnermans. I decided to keep the kit, purchase Type B replacements and use the Type A for non-tinnerman use.

Not specific to Bellanca Super Viking...I’m finding no exact match hardware

Ordered kit 04-03710 for a Pitts s2a. Don’t order. No washers are included and all screws were type A truss head when type B is required.

In case your ordering for a Mooney 201/231/252 just to let you know, the only screws I really needed were the cowling camlock screws, which are very commonly lost. This kit includes none, zero, zilch of these screws. Oops, wish I had known.