The TL-3424 is complete weight acceleration management. The
instrument incorporates a high-precision
sensor for measuring acceleration in the vertical axis. The SAS version
also incorporates a sensor for
measuring the indicated airspeed, which enables the activation of memory
recording. Both versions enable
to utilize an undercarriage scanner that can also activate memory recording.
The Control and Marker Button serves for storing marks in the memory records.
Pressing the button enters
marks into the memory records and enables the user manual control of the
memory records.
The TL-3424 incorporates a 20,000 line long-term memory and SchecKฎ memory
for storing the measured values at 0.1 to 60 second sample rate.
The TL-3424 checks all measured values at two levels - for a warning and
an alarm limit signalization.
When the alarm warning has been activated, the instrument will display
a Service message after the next
turn-on of the instrument to inform the user of the exceeded acceleration.
The User Button can be programmed in the main set-up for the quick display
of any measured value or for
the quick switch to another function. It is possible to download the measured
values from the instrument via
the serial cable RS-232c into your PC.
Click here to
download the ACCELEROMETER
TL-3424 MANUAL in PDF format.
ACCELEROMETER TL-3424
measures acceleration of your aircraft on the vertical axis
set the limit values at two levels (Warning and Alarm) for acceleration;
in case of exceeding these values, the instrument will warn you in time
of possible damage to the aircraft
always be informed on the exceeded limits from the previous flight
after turning the instrument on
recording is activated by the landing gear switch or by the internal
air speed sensor when the set air speed limits are reached
also suitable for IT offices and manufacturers for measuring the
operational load values of the aircraft
Basic functions:
display immediately the maximum acceleration reached, by pressing the
external button
using your PC, download at any time the history of the measured values
including symbols, which can be recorded into your log by pressing the
button
connect your 'g' Accelerometer to the output of the signalisation unit,
which will warn you of the exceeded acceleration limits
connect your 'g' Accelerometer with the Intercom using the iFamilyฎ Bus
and gain the option of having a voice alert of the exceeded limits
you can at any time download the latest version of the firmware to
your instrument, thereby always having the latest functions we prepare
for you
Other functions:
designed for all types of aircraft
measures 'g' acceleration
option to order the Accelerometer with an internal air speed sensor,
which enables monitoring 'g' acceleration and speed at the same time
incorporates an input for the external button that, when pressed,
records a symbol into the log, e.g. before an acrobatic element
enables the connection of a landing gear switch for the control
of recording
high-precision measurement
simple two-button control using the nav-menu
history of the measured values with use of the SchecKฎ method
user-programmable external button for the quick selection of any
function
Technical parameters
voltage: 10.0 to 32.0 Volts
backlights internal or external: 5V, 12V or 24V
current consumption: 50 to 250 mA @ 14 Volts
maximal voltage and signal current: 30 Volts, 1 Ampere
measurement: +/-1%(not including sensor accuracy)
measuring range: +/- 20g
resolution: 0.1g
operating: -20ฐC to 70ฐC (-4ฐF to 158ฐF) temperature
range
relative humidity: 95% without condensation
load: +/-20 g
vibration: 1 to 200 Hz
weight: 250 grams (0,55 lbs)
dimensions: 71x67x45 mm (2.795x2.637x1.771 inch)
diameter hole: 57 mm (2 1/4")
internal speed sensor 0 to 450km/h (240 knots) for recording control (version
SAS)
output status signal: grounded, max. 0.5Amps
communication line with a PC via standard RS-232c
Instruments - Accelerometers - TL Elektronics
