The FU60-A digital fuel guage provides a highly accurate display of fuel remaining, trip fuel, total fuel used, fuel consumption rate and “Time Remaining” at a current rate of flow. Fuel can be displayed with a resolution of 0.1 liters or gallons or as a percentage (0-100%). The
FU60-A “learns” your tank and fuel sender characteristics, and is accurate with any tank shape. It is compatible with all popular resistive fuel senders, both American and European. LOW and HIGH fuel alarms can be selected, then all setup, calibration constants, alarm values, etc. are saved in a nonvolatile memory. The FU60-A output signal on Terminal C may be programmed to activate an External Alarm (panel warning indicator) or fuel transfer pump. If the Fuel Transfer mode is selected, the pump would turn on when the user set LOW alarm is reached, and OFF, when the HIGH alarm set point is reached. The FU60-A’s display will flash during pump operation.
Size/ Weight: 2.475” square bezel, with standard aviation 2.250” raised round ring. Standard 2.625” diameter mounting hole layout at 45 degrees. Unique bezel design allows user either front or rear mounting in your panel. Gauge depth behind panel: surface mounted approx 2.60”, rear mounted, approx. 2.90”. Weight approx 2.3 oz.
Accuracy: Better than 2%, front panel adjustable. (trainable)
Display: 4 digits, Liters, Gallons or %, 000.0 to 6553 gallons or liters. Five levels of backlighting.
Alarms: 85dB internal LOW and HIGH fuel alarms settable from 000.0 to 6553.
Output: Terminal C can be programmed as an External Alarm, or as a fuel transfer pump control signal.
Senders: Works with most 0-70, 0-90, 10-80 and 30-250 ohm fuel level senders by VDO, Teleflex, GM, Stewart-Warner, Mercury, Faria and others. (both American and European)
Instruments - Aircraft Digital Instruments - Fuel Gauges
