CRUZ PRO DIGITAL HYDRAULIC PRESSURE GAUGE

The HY60-A DIGITAL HYDRAULIC PRESSURE GAUGE, displays pressure in PSI or Bars. It has built-in calibration curves for most popular 4-20mA senders/transducers manufactured by Ashcroft, Omega, Midas, Gems, and others. The desired maximum pressure range is easily selected from any one of sixteen preset ranges, from 30PSI to 10,000PSI. LOW and HIGH pressure alarm limits can be set over the entire range of the instrument/sender used. When activated, the HY60-A built-in 85dB alarm will sound and the diaplay will flash. The alarms can be enabled or disabled with a single key press. Five different levels of internal backlighting can be selected, then all setup, calibrations, constants, alarm values, sender range and light level chosen are all saved to a nonvolatile memory. The HY60-A comes Factory preset to use Terminal "C" as an External Alarm output if so desired.

Specifications

POWER: 9.5-33.0 VDC OPERATING TEMP: 32-122F (0-50C), SIZE: 2.475" square, low profile....easily stackable bezel, with aviation standard 2.250" raised round ring area. Aviation standard 2.625" diameter mounting hole layout at 45 degrees. The proprietary unique bezel design allows user the option of either FRONT or REAR mounting of the gauge in your panel. GAUGE DEPTH BEHIND PANEL: SURFACE mounted, approx 2.60", REAR mounted, approx. 2.90" WEIGHT: approx., 2.3oz ACCURACY: Better than 2%, front panel adjustable calibration. SENDERS: Built-in calibration curves for 4-20mA pressure transducers by Ashcroft, Omega, Midas, Gems, and others..16 selectable ranges from 30PSI to 10,000PSI using the front panel keys. ALARMS: Accurate LOW and HIGH pressure alarm limits settable from 0-9,999 PSI (0-680.0 Bars). DISPLAY: 4 digits, PSI or Bars, Five user selectable levels of backlighting. OUTPUT: Terminal "C" is Factory preset for use as an External Alarm signal (5V, 10mA)

Description Part No. Price Buy CRUZ PRO HYDRAULIC PRESS GAUGE 10-02878 $329.95