CHRISTEN 801 INVERTED

This accessory kit for Lycoming engines provides normal engine lubrication with minimal oil loss during aerobatic flight. It functions as a self-contained extension of the normal engine oil and breather systems.Can be installed in a few hours without engine disassembly. See chart below for System Selection. 809-K Breather Adapter Kit 811-V Sump Kit for Vertical Screen Sump Engines 811-A Sump Kit for Horizontal Screen Sump Engines 811-S Sump Kit for Horizontal Screen Sump Engines 807-4 Hose & Fittings Kit for 4-Cyl. Engines (incl. all required hoses, fittings and clamps) Christen 801-4 Basic System Kit $910.00 For four-cylinder engines. Includes 802 Oil Valve (with plug wrench and plugs for unused ports), 803 Oil Separator, 806-4 Breather Tee, and product manual which provides detailed instructions for application. Weight: 4.75 lb. installed. Christen 801-6 Basic System Kit $932.00 For six-cylinder engines. Same as 801-4 Kit, but is supplied with 806-6 Breather Tee. Weight: 4.75 lb. installed. Christen 811-V Sump Kit $372.95 For vertical-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 804-V Sump Fitting (vertical type) with crush gasket and MS20822-10D elbow. Weight: 0.50 lb. installed. Christen 811-A Sump Kit $511.00 For horizontal-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 805 Sump Plug with insertion tool, 804-A Sump Fitting (angular 360° swivel-type) with crush gasket and wrench for swivel clamping screw. Weight: 0.36 lb. installed. Christen 811-S Sump Kit $450.95 For horizontal-screen sump engines. Includes 810-S Oil Strainer Fitting, 810-R Oil Return Fitting, 805 Sump Plug with insertion tool, 804-S Sump Fitting (straight-type) with crush gasket. Weight: 0.33 lb. installed. Christen 809-K Breather Adapter Kit $242.95 For engines with forward breather ports such as the O-235 and O-290 models. Includes 809 Breather Adapter with gasket. AN842-12D hose elbow, and MS20913-6D plug for forward breather port. Weight: 0.53 lb. installed. Christen 812-2 Weld Boss Kit $179.95 For addition of oil ports to engine sumps. Includes two 812 Weld Bosses and quantity of 5% silicon-aluminum welding rod (type 4043) Weight: 0.12 lb. installed. Christen 812-1 Weld Boss Kit $96.75 Same as 812-2 Kit, except with only one 812 Weld Boss for addition of single sump port. Weight: 0.06 lb. installed. Christen 813-4 Breather Coil $94.00 Stainless steel spring wire. Installed inside breather hose to permit relatively sharp bends without collapsing or kinking. 10 x 47/64". Weight: 0.12 lb. installed. Christen 813-6 Breather Coil $17.50 Stainless steel spring wire. Installed inside breather hose to permit relatively sharp bends without collapsing or kinking. 10 x 63/64". Weight: 0.12 lb. installed. Christen 807-4 Deluxe Hose and Fittings Kit $1347.00 Contents: 3 ea. AN816-10D Nipples 1 ea. MS20823-10D Elbow 2 ea. AN842-12D Hose Elbows 8 ea. Aeroquip 816-10D Hose Fittings 6 ea. 50040-012 Worm-Drive Hose Clamps 10 ft.Aeroquip 601-10 Hose 5 ft. MIL-H-6000-3/4 Hose 1 ea. 50037-001 Abrasive Cut-Off Wheel All hoses and fittings required for deluxe show-plane quality installation on four-cylinder engines. Includes Aeroquip braided stainless steel hose for oil lines, MIL-H-6000 rubber-fabric hose for breather lines, thin abrasive cut-off wheel for professional-quality hose cuts, AN and MS fittings (blue anodized), Aeroquip hose end fittings (blue and red anodized), and miniature stainless steel hose clamps. All materials are factory new; no surplus. Weight Excluding Hose: 1.53 lb. installed. System Selection Lycoming Engine Model Required System Kits Optional System Kits and Components System Kit Sump Kit Weld Boss Kit (Note 2) Breather Adapter Kit Deluxe Hose & Fittings Kit Basic Fittings Kit Breather Coil for Standard Sump Modification for Extended Sump Modification Vertical-Screen Sump O-235 Series, all models O-290 Series, all models 801-4 811-V 812-1 812-2 809-K 807-4 808-4 813-4 O-320-A, B and C Series, all models O-320-E2G IO-320-E1A, E2A O-340-A and B Series, all models 801-4 811-V 812-1 812-2 None Required 807-4 808-4 813-4 Horizontal-Screen Sump O-320-D and E Series, except E2G IO-320-A1A, A2A IO-320-B, C and D Series, all models LIO-320-B and C Series, all models O-360-A Series, except A1C O-360-B and C Series, except C2B, C2D IO-360-B Series, except B1C, B1E, B2E HO-360-A1A HIO-360-B Series, all models 801-4 811-A or 811-S (Note 1) None Required 812-2 None Required 807-4 808-4 813-4 O-360-A1C, C2B, C2D IO-360-B1C, B1E, B2E, E1A, F1A HO-360-B Series, all models 801-4 811-A or 811-S (Note 1) 812-2 Extended Modification Required. Standard Modification Not Applicable Due to Sump Design. None Required 807-4 808-4 813-4 IO-360-C and D Series, except C1A LIO-360-C Series, all models TIO-360-A Series, all models HIO-360-A, C and D Series, all models 801-4 811-A or 811-S (Note 1) 812-1 (or 812-M for C1A) Extended Modification Required. Standard Modification Not Applicable Due to Sump Design. None Required 807-4 808-4 813-4 IO-360-A Series, all models 801-4 811-A45 or 811-S45 (Note 1) 812-1 Extended Modification Required. Standard Modification Not Applicable Due to Sump Design. None Required 807-4 808-4 813-4 O-540 Series, all models IO-540-C1B5, C1C5, C2C, C4B5, C4B5D, C4C5, D4A5, J4A5, N1A5, N1A5D, R1A5, R1A5D 801-6 811-A or 811-S (Note 1) None Required Two 812-M None Required 807-6 808-6 813-6 Notes: 1. Selection depends on requirement for angular-swivel or straight-type sump fitting.   2. Sump removal is required for attachment of weld bosses.

Model No. Description Part No. Price Buy 801-4 Basic System Kit for 4-Cyl. Engines 801-4 $910.00 801-6 Basic System Kit for 6-Cyl. Engines 801-6 $932.00 811-V Sump Kit for Vertical-Screen Sump Engines 811-V $372.95 811-A Sump Kit for Horizontal-Screen Sump Engines 811-A $511.00 811-S Sump Kit for Horizontal-Screen Sump Engines 811-S $450.95 809-K Breather Adapter Kit 809-K $242.95 812-2 Weld Boss Kit (for addition of 2 sump ports) 812-2 $179.95 812-1 Weld Boss Kit (for addition of 1 sump port) 812-1 $96.75 813-4 Breather Coil 813-4 $94.00 813-6 Breather Coil 813-6 $17.50 807-4 Deluxe Hose and Fittings Kit 807-4 $1347.00