XEVISION LANDING & TAXI LIGHTS

™XeVision super bright Xenon metal halide arc discharge landing & taxi lights for experimental aircraft. Light so bright and white you'd swear it's daylight. 500,00 candle power (3200 lumens) for the 35 Watt and more than 750,000 candle power (5400 lumens) for the 50 Watt systems – up to more than 8 times brighter than a standard 100 watt incandescent sealed beam. High HID efficiency means less than half the amp draw and about ½ of the radiated heat of standard or Halogen lamps. Recently ™XeVision introduced reliable HID pulsing capability based on their new proprietary ™XeStrike series ballast and their ™XePulse (patent pending) pulsing module. All the ™XeVision HID lighting systems are tested up to 100’000 feet altitude. They warranty their systems up to 35’000 feet for continuous fail-safe operation. ™XeVision offers retrofit kits for direct replacement or complete lighting system kits for new aircraft installation, different lamp shapes/sizes available. Many installation locations possible now with a variety of lamp shapes and sizes, extremely small form factor, and lower lamp housing temperatures, especially suited for tight spaces in composite aircraft. Their reflectors are made of metal – not plastic. High Intensity Discharge (HID) lighting is the most significant breakthrough in aviation lighting since the development of modern sealed beam lamps. They offer "Certified" quality at a very competitive price with a 5 year warranty, over 3,000 hour typical lamp life.   ™XeVision proprietary ballast ™XeStrike XV1A or XV3A is an integral part of all ™XeVision lighting systems. It has the following features: 12 or 24 VDC or wide range voltage input (8 VDC to 32 VDC for XV1A only) designed for pulsing of HID Xenon bulbs with the ™XePulse HID control module. designed with 35 watt or 50 watt output shielded metal housing for extremely low EMI/RFI using third generation D1S bulbs with integrated igniter and double shielded ®Teflon cables click to enlarge   XV-36-SL XeVision conversion kit & components with X1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 9° horizontal & vertical Landing/taxi light conversion designations landing light Preferred Application PAR 36 conversion, lamp diameter 4-5/16" 35 Watt PN 11-01760 $472.95 50 Watt PN 11-05038 $521.00           click to enlarge   XV-36-ST XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 55° horizontal & 10° vertical Landing/taxi light conversion designations taxi light Preferred Application PAR 36 conversion, lamp diameter 4-5/16" 35 Watt PN 11-01761 $467.95 50 Watt PN 11-05037 $516.00           click to enlarge   XV-46-SL XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 10° horizontal & vertical Landing/taxi light conversion designations landing light Preferred Application PAR 46 conversion, lamp diameter 5-11/16" 35 Watt PN 11-01762 $434.95 50 Watt PN 11-05204 $516.00       click to enlarge   XV-46-ST XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 50° horizontal & 8° vertical Landing/taxi light conversion designations taxi light Preferred Application PAR 46 conversion, lamp diameter 5-11/16" 35 Watt PN 11-01763 $467.95 50 Watt PN 11-05208 $516.00           click to enlarge   XV-22 KIT XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 15° horizontal & 10° vertical Landing/taxi light conversion designations landing or taxi light for external use like gear struts. Preferred Application Lamp fixture oval shape with 4.4” width, 2.8” height, and 4.1” depth. 35 Watt PN 11-01765 $467.95 50 Watt PN 11-05209 $516.00           click to enlarge   XV-23 KIT XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb select 1 of 4 pre-assembled cable lengths: 1 ft, 2 ft, 4 ft, 6 ft Beam Angle 20° horizontal & 8° vertical Landing/taxi light conversion designations landing or taxi light in wing area or externally as on a gear structure. Preferred Application Lamp fixture, rectangular, only 2.25" high with 4.7” width, and 4.2” depth. 35 Watt PN 11-01764 $467.95 50 Watt PN 11-05210 $516.00           click to enlarge   XV-19 Special Reflector Kit XeVision conversion kit & components with XV1A ballast (see above) and D1S bulb, no lens (*special warranty limitation) select 1 of 4 pre-assembled cable lengths: 1 ft., 2 ft., 4 ft., 6 ft. Beam Angle 20° horizontal & 8° vertical Landing/taxi light conversion designations landing or taxi light for protected wing and wing tip area - their smallest yet! Preferred Application Lamp fixture without housing, rectangular, with an extremely low profile of only 1.9" height at 4.5” width, and 3.3” depth. 35 Watt PN 11-05211 $467.95 50 Watt PN 11-05212 $516.00           click to enlarge   XV-36-H1 self-contained HID landing/taxi light XeVision conversion kit & components with integrated ™XeStrike XV4A ballast (see features above) and D1S bulb. Beam Angle uses XV-36 lamp, beam angle as for XV-36. Landing/taxi light conversion designations landing or taxi light for external applications like mounting on landing gear struts, and helicopter kits Features • Small footprint with a very small depth, 5" dia., depth 4.24" • D1S bulb (with integrated igniter) • Xevision thin ballast XVA4 integrated into the housing • Offered with 35 or 50 watt and 12 or 24 VDC • Housing is AI casting • Features a heavy-duty swiveling bracket and allows 2-axes freedom of adjustment. • Lamp is completely watertight • Weight 910 gr (32.1oz) XV-36-H1-SL (35 Watt) PN 11-05213 $540.00 XV-36-H1-SL (50 Watt) PN 11-05214 $587.00 XV-36-H1-ST (35 Watt) PN 11-05215 $540.00 XV-36-H1-ST (50 Watt) PN 11-05216 $587.00           click to enlarge   HID Pulsing Module XePulse XeVision conversion kit & components with one XV-PCM1 ™XePulse module. 12 or 24 VDC input Preferred Application For all XeVision HID aircraft lighting systems. Features • Drives up to two channels with up to 2 HID lighting systems of up to 80 watt total each channel, pulsed or continuous operation • Alternating or simultaneous pulsing rate ('wig-wag' rate) is preset to 1Hz (60 pulses per minute on each channel), controlled by any 3-way switch (not inlucded) for relay switching (low amperage) • Small and lightweight box with screw terminal strip XV-PCM-12 (12 VDC) PN 11-05217 $182.95 XV-PCM-24 (24 VDC) PN 11-05218 $182.95       click to enlarge   HID XENON WORK AND UTILITY LIGHT WITH HANDLE Designator Handled Compact Work Light XV-A1HCF handled Illumination beam angle flood 45° x 45° Type portable flood light with handle integrated ballast, D1S bulb, 12 or 24 VDC, 35 Watt, exceeds IP67 Typical Applications • aircraft construction • aircraft maintenance • aircraft inspection • hangar work space • agriculture • shop illumination • mining & tunneling & caving • road construction & paving • construction site • outdoor emergency light caving • snow grooming (snow cat) • interior decorating / painting • off road & back road logging XV-A1HCF (flood illumination, 35 Watt) (12 VDC) PN 11-05219 $459.95 XV-A1HCS (spot illumination, 35 Watt) (24 VDC) PN 11-05220 $459.95         XV-36-UMK UNIVERSAL MOUNTING KIT FOR XV-36 LAMPS P/N 11-05660 $33.00 Universal mounting from the side and the rear. Predrilled mounting holes for 3/16 bolts. Lamp can be freely mounted 360º. Stainless steel plate, predrilled with hardware for XV-36. Click here to view CAD model click to enlarge