Main Features:

• Weight: Approx 0.088 lbs (40 g)
  
• Outline Dimensions: 1.3 x 1.97 x 1.69 in (33 x 50 x 43 mm)
  
• 3-position red switch (ON, ARMED, TEST/RESET)
• D-SUB 9 pin connector with threaded locking device (UNC 4-40)
  
• Output to drive an external buzzer
  
• Output to control an external horn or annunciator (up to 1A)
  
• The Kit includes mating SUB-D9 connector for easier installation.
  
  Applications:
  
• AF- Compact, AF, AF-H, AP, AP-H
  
  
• Straight replacement for ARTEX RCPs to ensure easy replacement of your old two frequency ELT
  
  Caution:
  
• Switch is not waterproof. Cannot be installed flat.
  

RC102 REMOTE CONTROL PANEL KIT
Replacement control panel for ACK, AMERIKING plus Narco two wire switches and challenging locations.

Front panel included in RC102 & RC100

KANNAD RC102 RMT CNTRL PNL KIT
PN 11-07901
$89.75

BAT 200/300 - BATTERY REPLACEMENT KIT

• Application:
  AF, AF-H, AP, AP-H, AS, Survival
  
  
• Bat 300 Battery Replacement Kit. For all Kannad 3 frequency ELT's. Comes with 3 cell battery pack, replacement o-ring, desiccant pack and replacement self locking nuts.
  
  
• For 406AF Compact use BAT200. Part Number 11-06297

Main Features:
• Designed to fix the ELT with a retaining strap for quick removal in an emergency and for easy removal for maintenance or exchange.
  
• Designed to hold the auxiliary antenna folded (AP only)
  
• Qualified to maintain the ELT into place during 500 G shocks for 4 ms.
  
• Made of Moulded yellow plastic
  
• Weight: 0.38 lbs (175 g)
  
• Dimensions: 7.12 x 3.7 x 0.62 in
  (181 x 94 x 16 mm)
  
  Applications:
• AF, AF-H, AP, AP-H
  

Caution:
• The mounting bracket shall be fixed to the primary aircraft load-carrying structure
  
• It may be necessary design a metallic counterplate if the structure is not rigid enough (if static local deflection is greater than 2.5 mm (0.1 inch) when force of 450 Newton (100 lbf) is applied to the mount in the most flexible direction)
  
• The use of the four stainless steel screws with Nylstop nuts provided will ensure that the installation withstands 500G shocks.
  

Universal Compact Mounting Bracket

Joliet JE2
Artex ELT 200
ACK-E01 ELT
Ameriking AK450-1
Pointer Kannad 121
The Compact Universal Mounting Bracket is compatible with the drilling made for all 121.5 Mhz beacons on the market. To sum up, no more drilling is necessary for the retrofit, no cable change is required, which allows a quicker installation at a lower cost.

KANNAD UNIV MNT BRACKET CMPCT
PN 11-07900
$61.75

• Din 12 connector with serial memory module (SMM) for programming operations
  
• Pre-wired Programming dongle
  
• Variant of Programming Dongle A320 fitted with a female DIN12 connector on RCP side instead of 19 Pts Jaeger connector
  
• Contains the aircraft identification data (automatically downloaded to the ELT when connected)
  
• Avoids the use of specific programming equipment such as PR600 + Computer in case of ELT replacement
  
• Also used as a connector for the remote control panel (RCP)
  
• Weight: 1.6 lbs (45 g)
  
• Length: 8.66 in (220 mm)
  
  
• Compatible with all KANNAD 406 ELTs

• Din 12 connector is for connection to Remote Control Panel, CSI44 interface module, dongle or programming equipment.
  
  
• Compatible with all KANNAD 406 ELTs
  

KANNAD PROGRAMMING DONGLE
Never be AOG for an ELT with spares available within your fleet.

The Programming dongle is a smart connector identical to the DIN12 that is used to store aircraft programming information. Once attached to the ELT wire harness it allows fleet operators to move any ELT to any other aircraft. The stored aircraft data will be automatically downloaded into the ELT.

This connector is used in place of the DIN12 connector. Required for Navigation Interface connection.

KANNAD S1820514-01 PROG DONGLE
PN 11-07088
$239.90